Attention of high speed Chinese medicine crusher：
1. For the personal safety of the user, the power supply must be grounded.
2, the crushed material must be dry, not suitable for processing wet and greasy Chinese medicine.
3, the crushed drug should not exceed half of the capacity of the crushing tank.
4, general Chinese medicine crushing only half a minute, hard medicine crushing one minute.
5, the machine can not be used continuously for a long time, each boot time shall not exceed 5 minutes. If the number of processing is large, it should be used at intervals to prevent the bearing from overheating and damaging the motor.
6, when the cover is open, do not start the switch.
7, after long-term use, carbon brushes and blades such as serious wear, need to be replaced.
8, often check the blade screws, must be tightened.
This machine uses ultra-high speed fine motor and high-grade bearing supporting, can quickly crush all kinds of soft and hard medicinal materials, such as: Ganoderma lucidum, Panax notoginseng, etc.; It is suitable for Chinese medicine pharmacy, pharmacy, Chinese medicine processing plant, etc. The machine has the characteristics of small size, high efficiency, simple operation, delicate and beautiful, power saving, safety, etc. It is the most ideal crushing equipment for making capsule pills.
Use method of high speed Chinese medicine crusher
Please turn off the power switch before using the machine.
1. Open the top cover (close clockwise, open counterclockwise).
2. Put the dried medicine into the crushing box.
3. Close the top cover tightly.
4, plug in the power, turn on the timer switch.
5, when the rolling sound is more uniform, indicating that the drug has been crushed into powder, you can shut down.
6. Open the lid and pour out the powder.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com.
