V Mixer
Introduction
The V Mixer's cylinder is composed of stainless steel, and the internal and external walls are polished, giving it a beautiful appearance, uniform mixing, and a wide range of applications.
Advantages
This V Mixer's mixing cylinder boasts a one-of-a-kind design. The V Mixer has the additional benefits of great mixing efficiency, no dead angle, and uniform mixing.
The V Mixer has an acceptable structure and operates reliably. Simple operation, convenient material access; Combine thoroughly; The operation is concluded; Beautiful beauty and ease of cleaning Simple to maintain; Advantages of high production efficiency
Use and Care
1. Installation: Place the machine stably, install the machine feet, and level them so that the machine can operate freely.
2. Before use, add oil to the required oiling area, then run it without load, check whether the fasteners are loose, whether the electrical is normal, and whether the machinery is operating normally. If there is any abnormality, repair and debug it.
3. Turn the feeding port to the top, open the feeding cover to add materials. The amount of material added should not exceed the specified volume. Then close the feeding cover tightly and start the machine for operation. If any abnormality is found during the process, it must be stopped for inspection.
4. The inside and exterior of the hopper must be thoroughly washed after operation or after changing types.
Application
The V Mixer is frequently used in the pharmaceutical, chemical, food, and other sectors to combine dry powder materials.3D Powder Mixer can also swiftly and evenly mix a variety of materials in varying proportions.The mixing effect is strong, and the homogeneity is greater than 99.9%.
Working Principle
Driven by the drive shaft, the cylinder repeatedly performs the compound movement of translation, rotation, and tumbling, promoting the material to move along the cylinder in three directions, achieving the goal of uniform mixing.