First, several important issues of seafood drying
1, temperature - the drying of seafood is generally required to be carried out at a relatively low temperature to avoid high temperature affecting the quality of the product after drying.
2, humidity - the general water content of seafood is relatively large. Therefore, controlling the moisture discharge is an important factor in determining the drying quality. In addition, because the moisture of seafood is found in fats and oils, dehydration is more difficult, and controlling the rate of dehydration is critical.
3, drying time - seafood drying cycle is relatively long, rapid drying will generally destroy the dry quality;
4, color - it is important to maintain the color of seafood after drying;
5, circulation wind - seafood drying generally requires a larger circulation air volume, wind speed is relatively high, to avoid water vapor staying on the surface of the material.
Second, fish drying steps and detailed explanation
1. Raw material treatment
The raw fish of pickled fish tube is directly removed from the gills, or the abdomen is cut open to remove the internal organs. The raw fish of pickled Yu fish is usually cut open on the back and cut open together with the head.
2. Water washing
The raw fish should be washed in running water to remove the blood and mucus attached to the surface of the raw material, and the blood in the abdomen should be removed as far as possible. Blood stains have a special effect on the color and luster of the product, so it must be very thorough.
3. Salting
Wash, drain and marinate. The methods of salting and salting include impregnating the fish in salt water, the method of mixing salt in the solid salt sprinkled on the fish or coated in the fish, and the semi-impregnating method of salting the fish floating in concentrated salt water. The purpose of salting is to soak the salt into the fish through the impregnation of salt, and at the same time dehydrate the fish, so that the fish has a suitable salty taste and a unique taste, and extend the preservation time. According to the type and size of raw fish, the requirements of the product (salt content and dryness), appropriate methods and conditions should be taken accordingly for pickling. Generally speaking, dried salted fish is suitable for the salt method, and dried fresh salted fish is impregnated. The salt amount of the salt method is 10%-20% of the body weight of the fish, the salt water concentration of the impregnation method is 5%-15%, and the curing temperature and time should be balanced, which is the condition that must be achieved.
4. Remove salt
The pickled raw materials should be directly immersed in clean water or rinsed in running water to remove the salt. Be careful not to rinse too much in clean water, and the surface salt can be washed away. When drying after the salt treatment, in order to prevent the salt concentration of the surface of the fish body from being too high, to prevent the color and color of the product from becoming worse, so the salt and salt of the impregnation method and the version of the salt and salt of the impregnation method should be washed before drying.
5. Dry
Drying methods are sun method and mechanical drying method, each method has advantages and disadvantages, mechanical drying method is widely used, production is also high-speed and fast.
Sun method is the use of the sun and wind for drying a method, the low cost of drying is its biggest advantage, but in addition to having a large area of sun-drying field, drying is subject to meteorological conditions, which is its disadvantage. When the weather is bad, it is not easy to dry, even if it is dry, the quality of the product will be affected, and even the deterioration of the fish body will occur. Therefore, the general dry air, low temperature season is the ideal conditions for the sun. Ordinary machining method processing cost is relatively high, but if the use of high temperature heat pump dryer can effectively save energy input, greatly enhance the market competitiveness of the product. The high temperature hot dryer is a hot air dryer, which can quickly dry the fish and increase the output per unit time. The drying process can be divided into the initial drying of water removal on the surface of the fish body and the late drying of water removal inside the fish body. The initial drying should be controlled faster in the early stage, and the drying process in the later stage should not be too fast, so that the processing can obtain good quality products.

For large fish drying, if continuous drying, often cause the surface has been dry, and the interior is still not dry phenomenon, if the fish has been all dry will cause corruption caused by high water inside the fish body, in this case, should stop drying treatment, placed under natural conditions for some time, The water inside the fish body is diffused to the outside and then dried, so that the problem of different drying degrees of the fish body can be prevented.
6. Packaging and storage
The product can be packaged into a variety of suitable specifications, according to the dryness of the product, salt concentration, etc., the product can be refrigerated or even frozen storage and sales.
7. Quality standards
Appearance should be neat shape, clean surface, non-toxic spots, no odor, muscle solid, with normal color. Water content is 30%-38%, acid value ≤40-60, peroxide value ≤200-350 mm/kg.
Third, high temperature heat pump seafood drying room advantages:
1, drying process fully meet the requirements of food hygiene;
2, the box clean and hygienic condition is good, the finished product color is bright;
3, automatic control, reduce labor and labor intensity;
4, drying process no waste water/waste gas/waste residue generation, green environmental protection; The working environment is comfortable and good.
5, short service life, low operating cost, good economy;
6. Automatic control of temperature and humidity; The temperature and humidity fluctuate little in the drying process, and the drying quality is stable and reliable.
To learn more about our Fangyuan products, please click this link :https://www.fine-mill.com/products.
Our WhatsApp:+86 15896498575
E-mail:info@cnfyjx.com





