The use of small household shredders is not a lot, generally used occasionally to crush beans, mung beans, rice and so on. Because its materials are frequently replaced, for example, sometimes just after crushing soybeans, it is necessary to crush rice, and the two can not be mixed together, then how to clean and how to maintain it?
Household small mill cleaning:
After crushing a material each time, the crushing chamber in the crusher must be cleaned, otherwise the residual material in the crusher will be mixed into the next variety of material. Cleaning of machine room. The crusher engine room is what we call the "crushing chamber", and the items are crushed in the crushing chamber, so it is the key cleaning part. The main fixed part of the crushing chamber and the motor is in the "tool head" part inside the engine room. The tool head is fixed by a stainless steel screw, just use a wrench to loosen the screw here, take the blade off, you can separate the engine room and the motor, and pay attention to pulling out the link line when separating. The cleaning tools of the crushing bin involve special wrenches, brush, etc. The crusher is equipped with a special wrench, which is convenient to use when disassembling the tool head. A special cleaning brush is also available. Please use clean water when cleaning, do not use other cleaning agents, up to use detergent to clean, after washing to dry with a dry cloth.
Household small mill use and maintenance:
1. The crushed drug shall not exceed half of the capacity of the crushing chamber.
2, general Chinese medicine crushing only half a minute, hard medicine crushing one minute.
3, the machine can not be used continuously for a long time, each boot time shall not exceed 5 minutes. If the number of processing is large, it should be used at intervals to prevent the bearing from overheating and damaging the motor.
4, after long-term use, carbon brushes and blades such as serious wear, need to be replaced.
5, often check the blade screws, must be tightened.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com/products.
Our WhatsApp:+86 13382278726
