However, in the process of feed production, the sieve holes and raw materials are different, and the gap between the hammer and sieve needs to be adjusted frequently. In the ultrafine crusher, the particle composition in the inner cavity of the ultrafine crusher will also change at the beginning and after a period of operation.
In ultrafine crushers/components, hammers are prone to wear and tear. After the front end of the universal crusher's hammer blade is worn, the gap between the hammer and sieve increases, and the output will decrease, making it difficult to sustain. Of course, in order to meet the production testing needs of a certain type of ultrafine crusher, appropriate hammer and sieve gaps and suction air should be determined for a certain raw material and a certain sieve hole, without considering the service life of the sieve blade and hammer blade, High crushing efficiency data can be obtained in a short period of time, but in feed crushing production, various specific measurement data based on the work experience of operators and the technical content of the ultrafine crusher itself are two things. Personnel with rich operating experience and their labor also require high operating costs. After the hammer blade is worn, the gap between the hammer and screen increases, the friction force decreases, and the crushing efficiency decreases.






