Installation and debugging of traditional Chinese medicine micro pulverizer:
1. After the machine is in place, it must be placed smoothly and fixed with foundation screws.
2. Before testing, the internal cavity of the machine should be cleaned thoroughly and the front cover should be locked with a star shaped handle.
3. After turning on the power, pay attention to its phase sequence and rotate the spindle in the direction shown.
4. During the test drive, attention should be paid to whether there is any abnormal noise in the machine, so as to promptly check the vehicle.
5. Install a storage bag in the discharge hopper.
Operation and operation process of traditional Chinese medicine micro pulverizer
1. First, open the collection box door of the traditional Chinese medicine grinder, tie a special cloth bag at the material mouth, and then close the collection box door.
2. Select the screen according to the process requirements of the traditional Chinese medicine grinder and install the screen properly.
3. It is also necessary to check whether the materials to be crushed with a traditional Chinese medicine grinder require pre-treatment.
4. First turn on the switch of the fan, then turn on the switch of the motor, and let the equipment run normally without load before adding materials. Adjust the feeding speed based on the fragility and fineness of the material.
5. At the end of the crushing operation or before stopping, the feeding must be stopped and the traditional Chinese medicine grinder must continue to operate for a few minutes until there is no residue in the crushing chamber.
6. After turning off the motor switch of the traditional Chinese medicine grinder, open the door of the collection box and take out the materials for use.
7.If the amount of crushed materials is large, the traditional Chinese medicine grinder can be operated repeatedly until all the materials are crushed.
8.After the operation of the traditional Chinese medicine grinder is completed, all power switches need to be turned off.
9. Check the integrity of the components of the traditional Chinese medicine pulverizer equipment for any abnormalities.
To learn more about our Fangyuan products, please click this link：https://www.fine-mill.com.
