Nov 08, 2023 Leave a message

Operation Method Of Stamping Machine

1. Preliminary preparation: Firstly, a preliminary inspection of the stamping machine should be conducted, including checking whether all components of the machine are in good condition and whether maintenance is necessary. Then adjust the molds, workstations, and feeding devices of the stamping machine according to the needs of the work.

2. Startup operation: Plug in the power cord, press the startup button, and wait for the machine to start. Simultaneously adjust the slider as needed to confirm the positions of the top dead center, bottom dead center, etc.

3. Manual debugging: First, perform manual debugging to allow the slider to move according to the set process parameters, in order to adjust and check the operating status of the machine. After debugging, switch to automatic operation.

4. Start operation: Place the required processing materials on the feeding manipulator. Turn on the automatic operation button, and the press slider will automatically move up and down according to the set program to complete the machining process.

5. End operation: After the processing is completed, turn off the automatic operation button, take out the processed product, and clean up the waste and residual materials. Turn off the power and perform necessary maintenance on the stamping machine.

 

2

 

Send Inquiry

whatsapp

Phone

VK

Inquiry