The details of the use of Chinese medicine pill making machine are as follows:
1, Chinese medicine crusher is suitable for ambient temperature of -5℃ to 40℃, relative humidity is less than 90%. There is no conductive dust and corrosive metal gas around, and it is placed in a ventilated and clean position.
2, the pill making machine is placed on a safe table, in the case of confirming the power supply voltage, the power supply should be close to the table, the power socket should have a reliable grounding wire, it is strictly prohibited to pull out the power cord, in order to prevent human overturn, break the pill making machine and other accidents. When operating, the workbench should be free of other items.
3. After the pill making machine is used, cut off the main power supply, pull out the power plug, remove the hex screw, remove the mold shaft knife, and scrub it clean with medical alcohol. Or according to the need to change the different specifications of the mold, and then scrub with medical alcohol, replace the pill making roller and the clutch roller.
4. When the small pill making machine is in use, it is strictly forbidden to contact the pill making roller and the clutch roller with the hand and the brush or other tools to avoid finger injury. It is strictly forbidden to process the pill with the power under the protection of the uncapped shell and the gear box cover to avoid unnecessary personal accidents.
5, in case of power cord damage (such as bare wire exposed, etc.), you need to go to the local office maintenance department to buy a dedicated power cord replacement. In case of switch or socket failure, to stop use, it is strictly prohibited to change the line to continue to use, should be replaced in time with the same specification of the beginning or socket, to avoid mechanical and personal accidents.
6, proportional production method: honey pill, water pill, coated powder mixing production method see pill reference formula.
7, the matching crushing equipment can choose Chinese medicine crusher.
8. When the water pill coating device is not in use, it can be directly disassembled and washed to rotate clockwise and pull it out. Put in a reliable and clean position for use, and apply a small amount of clean cooking oil to the exposed part of the water pill coating shaft to prevent floating rust. Do not directly clean the machine or electric heater with water. When the machine is not in use, it should be placed in a dry, clean and ventilated place. During the use of the electric heater, it is strictly prohibited to contact with water to prevent electricity conduction, resulting in electric shock and other personal accidents.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com.
