Jan 25, 2024 Leave a message

Two Dimensional Motion Mixer Main Structure Design, Do You Understand

As a very typical presence in the mixer, the two-dimensional motion mixer is very important for many people engaged in industry, because it has some significant advantages compared to other mixers. So, let's also look at the two-dimensional motion mixer today.
The two-dimensional motion mixer is mainly composed of a drum, a swing frame and a frame. The rotor is mounted on the swing frame, supported by four rollers and positioned axially by two stop wheels. Among the four supporting rollers, two transmission wheels are driven by the rolling power system to make the rotor roll. The swing frame is supported on the frame by the bearing assembly. Two-dimensional motion mixer is widely used in medicine, chemical industry, food, dye, feed, fertilizer, pesticide and other industries, especially suitable for the mixing of various powder and granular materials with large tonnage.

 

25


The drum and all exposed parts of the two-dimensional motion mixer are made of stainless steel, and the drum is fully welded inside and outside. The internal and external polishing operation table is made of non-slip pattern plate, the equipment support is outsourced with carbon steel spray paint, the rolling organization is located in the upper frame, and the cycloidal pin wheel reducer is selected for transmission. When working, the reducer passes through the sprocket and chain to drive the drive shaft, and then through the driving wheel to make the cylinder rotate. The swing structure is located in the lower frame, and the cycloidal pinwheel reducer or worm gear reducer is used for transmission.
When the two-dimensional motion mixer works, the motor drives the reducer through the belt pulley or sprocket, and then shakes the frame through the double connecting rod assembly, so that the cylinder is swayed at a certain Angle. Compared with the structure of other manufacturers, the structure ensures that the base of the equipment does not accumulate material, no pollution, convenient punching, and truly conforms to the GMP requirements. Under the effect of two layers of flow organization and swing organization, the charged material simply flows together, and there is a shaking activity, so that the material in the cylinder can be mixed in this way, each batch of mixing time is about 15-20mm, the temperature is sufficient, uniform equipment can be configured with automatic vacuum feeder and interface, convenient feeding, shorten the operation time. All transmission components and electrical products are selected.

To learn more about our Fangyuan products, please click this link :https://www.fine-mill.com.

Send Inquiry

whatsapp

Phone

VK

Inquiry