Dec 28, 2023 Leave a message

V-type Mixer Is A Kind Of High Efficiency Mixing Equipment

V-type mixer is a high efficiency mixing equipment, has been used in paint, ink, pigment, paper coating, ceramic glaze, magnetic materials, plastic fillers, functional materials and refractory gold and other industries.

V-type mixer is composed of V-shaped cylinder, closed bracket and transmission device. The discharge port is equipped with a sealed butterfly valve. It works under sealed condition and there is no dust in mixing. The material is produced by two cylinders of different lengths in the rotation process, so that the material is cross-mixed with each other, and the mixing uniformity can reach more than 99%. The cylinder is made of 304 stainless steel, and the inner and outer walls are polished. The machine is equipped with a timing control device, which is easy to operate. When discharging, it can start the button and align the discharging port with the cylinder.

The main use of V-type mixing machinery is to combine a variety of different materials to produce evenly mixed materials. Reasonable use and maintenance can improve the efficiency of V-type mixing machinery and reduce unnecessary minor faults. How to maintain V-type mixing machinery in use?

Keep the discharge mechanism clean, the discharge mechanism in the operation of V-type mixing machinery, need to operate flexibly, at this point should often do a good job of cleaning the discharge mechanism, timely clean up dust and other residues, to prevent affecting the normal operation of the machinery.

Do a good job of lubrication and oiling, V-type mixing machinery is often operated, bearing wear is more severe, timely oiling to maintain the lubrication function of the bearing, can reduce the wear degree of the bearing, and then play a role in maintenance of V-type mixing machinery.

The chain needs to be cleaned, the transmission chain needs to be oiled frequently, and the right amount of No. 30 mechanical oil is used when the oil is brushed, and the oiling work is done at a certain time to maintain the lubrication of the chain and the normal operation.

Do a good job of the reducer oil change regularly, the reducer general refueling operation after more than 500 hours, that is, the need to update the new oil, after continuous work, half a year can be updated, remember to buy brand lubricating oil when buying oil, to avoid damage to the machinery of inferior lubricating oil.

Before the operation of the V-type mixer machine, it is necessary to draw a safe area of the rotation arc of the machine to prevent personal injury and mechanical damage.

When installing V-type mixer, it should be noted that the whole machine is parallel to the ground to prevent the whole machine from swinging during the working process.

Place the V-type mixer smoothly, install the machine feet, pad flat, make the V-type mixer function run freely. Before use, oil should be added to the refueling place, and then no-load operation, check whether the fasteners are loose, whether the electrical is normal, whether the V-type mixer is operating normally, if there is an anomaly, repair and debugging. Turn the feeding port to the top, open the feeding cover for feeding, the feeding amount shall not exceed the specified volume, then close the feeding cover, start the machine to operate, if abnormal is found on the way, it must be stopped for inspection. Replace the variety must be the hopper inside and outside of the rinse. V-type mixer is suitable for mixing powder or granular materials in chemical, food, medicine, feed, ceramics, metallurgy and other industries.

28

 

The correct operation process of V-type mixer is:

1. Open the feed port of the mixer, and re-confirm that the feed port is closed, and put the specified amount of material into the V-shaped hopper according to the process control requirements.

2. After feeding, close the feeding port and lock it to prevent the material from flowing out when mixing.

3, start the V-type mixer forward button, adjust the motor speed, slow forward running.

4. During the operation of the V-type mixer, the fuselage should be operated at a constant speed without abnormal noise.

5, mixing to reach the specified time, by adjusting the motor speed button to stop, stop should make the mixer discharge port is facing the ground, and adjust the motor speed button to 0, V-type mixer will stop button to the right rotation, cut off the power supply.

The fault problem of V-type mixer is:

1, V-type mixer host vibration and noise abnormal sound, installation is not adjusted and speed change machine damage.

2, V-type mixer in the use of the process, sudden shutdown and discharge mechanism if not normal operation.

3, V-type mixer can not start, mainly because the power supply is not connected, lack of phase, check the line.

4. Insufficient motor power, improper preparation of belt pulley, belt slip, serious wear of hammer, uneven feeding or excessive water content of raw materials are the main reasons for low production efficiency.

5, bearing overheating when the bearing lubrication is poor, damaged or spindle bending, rotor serious imbalance, belt is too tight will make the bearing overheating. By adding and replacing lubricating oil, replacing bearing and spindle, balancing rotor, adjusting belt tightness and other methods, the bearing can be restored to normal state. The dry and wet materials of the three-dimensional mixer can be mixed by the trough mixer. CH series trough mixer is used for mixing powder or wet material, so that the main auxiliary materials are evenly mixed in different proportions. Widely used in pharmaceutical, food, chemical, electronic and other industries of dry powder mixing. The trough mixer is made of stainless steel in contact with the material. The clearance between pulp blade and barrel body is small. Both ends of the mixing shaft are provided with a sealing device to prevent material leakage. Hopper adopts button control, easy discharge. Especially suitable for three-dimensional mixer is a widely used in pharmaceutical, chemical, food, light industry and other industries and scientific research units of novel material mixer, the machine can be very uniform mixing flow performance of good powder or granular materials, so that the mixed material to achieve the effect, the existence of centrifugal force in the mixing movement, it can make different density of mixed materials produce segregation. The heat source of the three-dimensional mixer is mainly self-friction, so in most cases no additional heating is required. The V-type mixer is composed of a container welded by two cylinders and a reinforced mixing element, which has a single V type and a multi-V type series. When the container rotates, the material to be mixed is divided into two flows when the top Angle of the cylinder turns upward, and then the top Angle turns downward, and the material flows into the top Angle again, so it is repeatedly divided and combined to achieve mixing.

To learn more about our Fangyuan products, please click this link :https://www.fine-mill.com.

Send Inquiry

whatsapp

Phone

VK

Inquiry