Before, I have introduced the operation method and working principle of the ultrafine grinding unit to you. Today, I will take you to understand the advantages of the ultrafine grinding unit, so that you can have a better understanding of it. The following is the introduction of the advantages of the ultrafine grinding unit:
1, high output, good effect, ultrafine grinding machine adopts hierarchical grinding method, coarse crushing first, after fine powder, extending the grinding stroke, so that the material in the process of flow layer by layer crushing, greatly improve the work efficiency and grinding fineness.
2, preset water cooling device, the upper and lower cavities are set up water cooling layer, the external use of quick connection type joint, easy to connect the water pipe. When working, the water is used, and the high temperature generated during the work is taken away by the circulating flow of water, which not only ensures the original characteristics of the crushed material, but also protects the performance of the machine, and avoids the potential safety hazards caused by high temperature.
3, pulse dust removal device
(1) Pulse dust removal is to increase the method of blowing compressed air to remove the dust attached to the filter bag, according to the size of the equipment will have different groups of pulse valves, controlled by the pulse controller. Open a set of pulse valves at a time, using high pressure air from the inside out to blow back to remove the dust on the part of the bag it controls, while the other bags work normally, at intervals the next set of pulse valves open, and so repeat the cycle.
(2) The pulverized dust is easy to adhere to the bag, if there is no pulse dust removal, the bag will soon be stuck with dust, resulting in poor exhaust, resulting in poor powder transportation after crushing, reduced production efficiency, and will lead to faster temperature rise of the crushing chamber, then you need to shut down to clean the bag, time-consuming and laborious.
Pulverizing unit
(3) Strong cleaning capacity, high dust removal efficiency, small footprint. Prolong cleaning cycle, reduce labor intensity.
4, the addition of air hammer, many Shakron collector will produce material sticky wall, recovery is not smooth, the need to manually knock knock, not only increases the amount of labor, but also causes Shakron appearance deformation, affecting beauty and material collection. The machine is equipped with an air hammer on the outer body of Shaklong, which can automatically knock at regular intervals, so that the material collection is smoother and save time and labor.
5, small size, cost-effective. The machine adopts integrated design, more compact and reasonable, small footprint, more stable center of gravity, under the premise of overall performance improvement, reduce unnecessary investment, make the machine more cost-effective, stronger working ability.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com/products.
Our WhatsApp:+86 15896498575
E-mail：info@cnfyjx.com
