When the motor of the water-cooled mill starts to run, the connecting shaft and the grinding disc on the connecting shaft run together. When the grinding material enters the grinding sleeve from the hopper, the relative operation between the grinder and the grinding sleeve causes the crushing force to grind the material into small pieces of particles, and the small particles after grinding are brought into the middle of the two grinding pieces under the spiral movement of the grinding disc. The relative operation of the teeth of the grinding pieces causes the material to be crushed into fine powder particles in a short time, and the powder flows out of the tooth groove of the grinding pieces and is thrown around. At the same time, it is installed under the scraping plate on the grinding disc and flows out from the powder outlet.
Water cooling working principle: the outer wall of the grinding chamber and the bottom of the grinding chamber are designed with a water layer, and the interlayer is provided with a sleeve to ensure that the water can be circulated without dead corners. Water is pumped through the interlayer to circulate and cool down.
Advantages: 1. Low temperature grinding, retain the nutritional value of grains; 2. Low temperature grinding, no longer burn materials
High temperature grinding behind the crisis.
Customer retention is low
1. High temperature grinding, a large loss of nutrients.
2. Dry powder, bad taste, difficult to swallow.
3. Grinding powder at high temperature makes eating powder more prone to fire.
4. High temperature grinding powder, smell very fragrant, tasteless food.
The machine is difficult to operate
1. Grind two or three catties of powder continuously, and the powder will begin to paste;
2. Grinding for 3 minutes, cooling and bagging for 10 minutes, low efficiency;
3. Continuous work, the machine is hot, the salesperson complains.
4. The machine is difficult to clean.
Water cooled mill features
1. Change the ambient temperature of the chamber, reduce the temperature of the powder outlet by 40%;
2. Grinding powder does not change color, light color, less nutrient loss, fluffy powder is not easy to cluster; Grain taste arises spontaneously, not easy to deteriorate;
3. Eat powder is not on fire, the powder is more delicate.
4. Powder cooling time is greatly shortened, due to the low powder temperature, it only takes one or two minutes to bag.
5.100% pure oil or 100% pure sugar materials are directly ground.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com.
Our WhatsApp:+86 13382278726
