1. Cleaning of the shredder compartment. The shredder cabin, also known as the "crushing chamber," is a key cleaning area where items are crushed. The main fixed parts of the crushing chamber and motor are located in the "blade" part inside the engine room. The blade is fixed by a stainless steel screw on top. As long as you loosen the screw here with a wrench and remove the blade, you can separate the engine compartment and motor. When separating, be sure to unplug the connecting wire. The cleaning tools for the crushing bin involve specialized wrenches, brushes, etc. The shredders are equipped with dedicated wrenches, which are convenient for disassembling the blade. The Hongda Traditional Chinese Medicine Grinder is also equipped with a dedicated cleaning brush. Please use clean water instead of other cleaning agents when cleaning the traditional Chinese medicine grinder. At most, you can use detergent for cleaning. After washing, use a dry cloth to wipe dry.
2. For other parts of grinding and cleaning: mainly for cleaning the screw cover and external components of the grinder. These places can be gently brushed clean with a brush, and if necessary, cleaned with water or detergent. Soak the product with water spray, then pour in the washing solution. Stir the washing solution evenly with the water to evenly cover the surface of the product. This way, the dirt gradually does not stick to the traditional Chinese medicine grinder as much during this process. A small household shredder can soak the brush and start brushing the surface and interior. This cleaning will instantly remove most of the dirt from the product, whether it is surface or interior. After this process is completed, rinse the crusher with clean water to prevent the already detached dirt from contaminating the product again, as the phenomenon of secondary adhesion is relatively bad.
Another method is to use a cleaning machine to clean the traditional Chinese medicine pulverizer, fill the cleaning machine with water and detergent, and then place the traditional Chinese medicine pulverizer that needs to be cleaned in it. After that, the cleaning machine began to operate, and the water flow inside would generate a strong flow force, causing a large amount of dirt inside the crusher to fall off and not easily adhere to it again due to the rapid flow of water. The effect is also very ideal. After cleaning the traditional Chinese medicine grinder with clean water, carry out relevant drying work to avoid unnecessary losses caused by excessive water retention time.
