The multi-functional crusher has the advantages of simple structure, simple assembly and disassembly of the crushing chamber, easy to clean, stable operation, low noise, low vibration, the machine is made of stainless steel, in line with GMP requirements, simple operation and so on. So, what do you need to pay attention to its use?
1. Before use, check whether all fasteners of the machine are tightened and whether the belt is tensioned.
2, check whether there is metal and other hard debris in the machine crushing (materials must be checked before crushing, do not allow metal hard debris mixed) otherwise it will break the tool, affect the operation of the machine.
3, the multi-functional grinder with dust removal function of the model, dust removal system pipe connection using quick disassembly structure, can be quickly and easily disassembled, cleaning.
4, the machine in the external power supply according to the machine power, add the appropriate circuit breaker, used in the machine load is too large, the current is too large automatically cut off the power, timely protection of the motor. Suitable clearance between rotor and stator, better crushing effect.
5, the machine sealing performance is good, built-in labyrinth seal, to prevent dust spillover; The crushed material particles should not be too large, such as the stuffy machine (that is, the machine due to excessive load caused by the speed clearly slow or be stopped), should immediately cut off the power supply.
6, multi-functional crusher can be equipped with cyclone separator and dust collector, no dust flying in the production process, dust collection bag can effectively intercept the air in the micro powder. At the same time, the fine powder trapped in the dust collection bag can be effectively recovered and the loss rate of the material can be reduced.
7. Because the rotor rotates at high speed and brings in a lot of air, it has self-cooling function and can be used to crush low-sensitivity materials with lower requirements.
8, replace the screen, wash the crusher should pay attention to avoid water into the motor, fan control box and bearing, so as not to affect the service life, always pay attention to maintain the cleanliness of the crusher, in order to extend the service life of the bearing, should add lubricating grease in time, lubrication with ZL-1 lithium grease, bearing seat above the oil cup for pressure injection grease.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com.
