Jan 25, 2024 Leave a message

Users in The Use Of Two-dimensional Sports Mixer At The Same Time, Maintenance Can Not Be Neglected

Users in the use of two-dimensional sports mixer at the same time, maintenance can not be neglected

Two-dimensional motion mixer is composed of a rotating barrel, a swinging frame and a frame. The rotating barrel is mounted on the swinging frame, supported by four rollers and axially fixed in four rollers by two stop wheels. Two of the transmission wheels are driven by the rotating power system to make the rotation simple, and the two-dimensional mixer swinging frame is driven by a set of crank swinging rod mechanisms, which are mounted on the frame. The swing frame is supported on the frame by the bearing assembly, so that the cylinder rotates and participates in the swing at the same time, so that the materials in the cylinder can be fully mixed.
The drum of the dimensional motion mixer can carry out two movements at the same time, one is the rotation of the knot drum, and the other is the wet movement of the drum with the swing of the swinging frame, and the gentle material in the drum with the drum rotation, flipping, and gentle at the same time, and with the swing of the drum. Under the joint action of these two movements, the material is fully integrated in a short time. Mixing simple discharge with interesting travel blades, so that the mixer has a rapid withdrawal, mixing volume, convenient production and other nodes, two-dimensional mixer live all powder, granular material mixing, the use of double tube transmission, than the general single tube transmission stable, indirect transmission to reduce the reducer load, extend the service life. The frame adopts a fully enclosed structure for easy cleaning in accordance with GMP standards.

 

31


Users in the use of two-dimensional sports mixer at the same time, maintenance can not be neglected:
1. The machine needs to be used frequently, the reducer must be replaced with new oil every three months, and the reducer should be cleaned and new oil added when replaced.
2. In the process of using the machine, if it is found that the machine shakes abnormally or makes abnormal sounds, it should be stopped immediately for inspection.
3. When assembling and disassembling the mixing slurry, it should be lightly disassembled, firmly installed and gently put to avoid deformation and damage.
4. Electrical control parts should be kept clean and sensitive, and faults should be repaired in time.
5. Check the equipment regularly 1-2 times a month, check the parts for worm gear, worm, bearing, oil seal, each running part is flexible, fasteners are loose, abnormal situation should be found in time,6. After the use of the machine, the residual materials of all parts of the machine should be brushed, the machine must be wiped clean, the surface of the machine is coated with anti-rust oil, and covered with a cloth.

To learn more about our Fangyuan products, please click this link :https://www.fine-mill.com.

Send Inquiry

whatsapp

Phone

VK

Inquiry