Generally speaking, the three-dimensional mixer is mainly composed of the frame, transmission system, electrical control system and multi-direction transport mechanism and other structures. It is a device used to evenly mix two or more kinds of materials. Through effective use, it can not only increase the contact surface area of materials to promote chemical reactions, but also accelerate physical changes to accelerate the dissolution and mixing of materials. Thus further improve the quality of materials.
In actual operation, due to the multi-direction movement of the mixing barrel body, there are more cross-mixing points of materials in the barrel body, with good uniform effect, high loading capacity, short mixing time and high efficiency, which further improves the output. In addition, due to the fine polishing of the barrel body wall of the equipment, it will not pollute the materials, and it is convenient to discharge, easy to clean and easy to operate in the later period. It greatly reduces People's Daily workload and is unanimously praised.
When the three-dimensional mixing machine is in operation, the mixing process should be controlled according to the requirements of each feeding amount and mixing speed, and the quantity of input and discharge should be reviewed in time if there is any abnormal, and the operator should cut off the power supply during loading and unloading. Secondly, the equipment should be cleaned with water after each operation, and the three-dimensional mixing machine should be clean to ensure that there is no attachment. And regularly check and adjust the tightness of the triangle tape and chain, inject grease and lubricating oil at the bearing and passive shaft slider, and apply lubricating oil at the sprocket and chain, so as to ensure that the three-dimensional mixing function is normally put into production, laying the foundation for the quality of the material, so that it can meet the requirements of the industry.
In order to ensure the quality of materials, all materials involved in mixing are required to be evenly distributed when mixing, the degree of mixing is divided into ideal mixing, random mixing and non-mixing three states, the degree of mixing of various materials in the mixing machine depends on the proportion of materials to be mixed, physical state and characteristics, as well as the type of temperature sealing machinery used and the duration of mixing operation and other factors. Generally speaking, the main convection diffusion and no flow diffusion caused by stirring increase the surface area of molecular diffusion between different liquids and reduce the diffusion distance, thus shortening the molecular diffusion time, if the viscosity of the liquid to be mixed is not high, it can reach a random mixing state within a short mixing time, if the viscosity is high, it needs a longer mixing time, so as to provide protection for the quality of the material.
The three-dimensional mixer can combine a variety of materials into a uniform mixture, such as mixing cement, sand, gravel and water into a very coagulated soil mixture, etc. : It can also increase the contact surface area of the material to promote chemical reactions: it can also accelerate physical changes, such as granular solute added to the solvent, which can be accelerated through the effect of mixing machinery. Three-dimensional mixer is a kind of novel material mixer widely used in pharmaceutical, chemical, food, light industry and other industries and scientific research institutions. The machine can mix powder or granuloid materials with good flow performance very evenly, so that the mixed materials can achieve better results.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com.
