Jul 03, 2024 Leave a message

What Is The Main Function Of The Tablet Press?

Tablet press mainly refers to the tablet process research used in the pharmaceutical industry, pressing particles into a diameter of no more than 13mm round, shaped and with text, symbols, graphics flake manual or automatic continuous production equipment. The machine that puts the particle or powder material into the die hole and presses the tablet by the punch is called the tablet press.
The working principle of the tablet press:
The punch and die are subjected to great pressure during the pressing process, and are commonly made of bearing steel and heat treated to increase its hardness.
There are many types of punches, and the shape of the punch depends on the desired shape of the tablet. According to the structure shape of the die, it can be divided into circles and special-shaped (including polygons and curves); The shape of punch section has plane shape, bevel shape, shallow concave shape, deep concave shape and comprehensive shape. Flat and bevelled punches are used to press flat cylindrical tablets, shallow concave is used to press double convex tablets, deep concave is mainly used to press chips coated tablets, and comprehensive shape is mainly used to press special-shaped tablets. To facilitate the identification and administration of drugs. Marks such as drug name, dosage and vertical and horizontal lines can also be carved on the end face of the die. Pressing different doses of tablets, should choose the appropriate size of the die.

 

Rotary-tablet-press


The working process of the tablet press:
The working process of the tablet press can be divided into the following steps:
① The punch part of the downward punch (its working position is upward) extends into the middle die hole from the lower end of the middle die hole to seal the bottom of the middle die hole;
② Use the feeder to fill the drug raw material into the middle die hole.
③ The upper punch part (its working position is downward) falls from the upper end of the middle die hole into the middle die hole, and the downward stroke is certain to press the powder into a piece;
④ The upper punch lifts out the hole, and the lower punch lifts the pressed tablet out of the middle die hole to complete the single tablet pressing process.
⑤ Flush down to the original position to prepare the next material filling.

To learn more about our Fangyuan products, please click this link :https://www.fine-mill.com/products.

Our WhatsApp:+86 13382278726

Send Inquiry

whatsapp

Phone

VK

Inquiry