Peanut Butter Colloid Mill Machine
Introduction
Peanut butter colloid mill machine : product before peanut oil extraction. The color of peanuts is yellow brown, fine texture, taste, with the inherent rich aroma of peanuts, no mold, no worms, generally used for noodles, steamed bread, bread or cold dishes and other condiments, but also for sweet cakes, sweet buns and other stuffing ingredients. Peanut butter is made of high-quality peanuts and other raw materials. The finished product is hard and tough, and has a strong flavor of fried peanuts. High-quality peanut butter is generally light beige, delicate quality, strong aroma, and no impurities are particularly obvious when applied to production. The process is basically like this: baking, cooling, peeling, grinding, mixing, grinding, cooling, and finished products. It is no problem to do small samples in this process. In the production, it was found that it was difficult to mix the thick peanut butter from the grinder with the auxiliary materials evenly, and the problems of time, quality and output were prominent, which was the main reason for the first defect, and the second defect was that the cooling tank was too slow.
Factors affecting grinding and grinding results:
1. The shear rate of the colloidal grinding head (the greater the effect, the better).
2. The tooth shape structure of the colloidal grinding head is divided into initial teeth, middle teeth, fine teeth, ultra-fine teeth, and the better the effect of fine teeth.
3. The residence time of the material in the grinding chamber and the grinding and crushing time can be regarded as the same motor, the smaller the flow rate, the better the effect.
4. The number of cycles "the more, the better the effect, to the time limit of the equipment, it can not be better)
Working Principle:
Peanut butter colloid mill machine is composed of stainless steel and semi-stainless steel colloid mill, the basic principle is between the fixed teeth and the moving teeth by high-speed relative linkage. In addition to the motor and some jujube parts, where the parts in contact with the material are made of high-strength stainless steel, especially the key dynamic and static grinding disks are strengthened. Therefore, it has good corrosion resistance and wear resistance, so that the processed materials are pollution-free and clean. Colloid mill is driven by the motor through the belt transmission gear (rotor) and matching fixed teeth (stator) for relative high-speed rotation, one high-speed rotation, the other stationary, the processed material through its own weight or external pressure pressure to produce downward spiral impact force, Through the gap between the fixed and rotating teeth, the material is subjected to strong shear force, friction, high-frequency vibration, high-speed vortex and other physical effects, so that the material is effectively emulsified, dispersed, homogenized and crushed to achieve the effect of ultrafine crushing and emulsification of the material.
Technical parameters
| Model | JM-50L | JM-80L | JM-100L | JM-120L | JM-140L | JM-80F | JM-100F | |
|
Emulsification fineness single loop or multicycle |
2-50 | 2-50 | 2-50 | 2-50 | 2-50 | 2-50 | 2-50 | |
| Change range(mm) | 1-0.01 | 1-0.01 | 1-0.01 | 1-0.01 | 1-0.01 | 1-0.01 | 1-0.01 | |
|
Production Capacity (changing with materials) |
0.01-0.3 | 0.3-1 | 0.5-2 | 0.7-3 | 0.8-4 | 0.3-1 | 0.5-2 | |
| Motor | Power(kw) | 1.1 | 2.2 | 3 | 4 | 7.5 | 3 | 4 |
| Voltage(V) | 380 | 380 | 380 | 380 | 380 | 380 | 380 | |
| Rotating speed(r/minjkl) | 2900 | 2900 | 2900 | 2900 | 2900 | 1800-5000 | 1800-5000 | |
| Gringding disc dia.(mm) | Φ50 | Φ80 | Φ100 | Φ120 | Φ140 | Φ80 | Φ100 | |
| Discharge gate dia.(mm) | Φ15 | Φ25 | Φ32 | Φ40 | Φ40 | Φ25 | Φ32 | |
| Feed inlet dia.(mm) | Φ32 | Φ50 | Φ50 | Φ65 | Φ80 | Φ50 | Φ50 | |
| Water-cooling tube dia.(mm) | Φ1/8" | Φ1/4" | Φ1/4" | Φ1/4" | Φ1/4" | Φ1/4" | Φ1/4" | |
|
Overall Dimensions (L*W*H) |
Length(mm) | 420 | 520 | 560 | 560 | 600 | 640 | 750 |
| Width(mm) | 280 | 400 | 420 | 420 | 450 | 550 | 620 | |
| Height(mm) | 760 | 900 | 950 | 950 | 1000 | 1030 | 1080 | |
| Weight(kg) | 45 | 84 | 113 | 135 | 195 | 210 | 275 | |
FAQ
1. Q:Are you a manufacturer, trading company or a third party?
A:We are a manufacturer,we have our own factory
2. Q:What's your warranty terms?
A: We offer different warranty time for different products. Please contact with us for detailed warranty terms.
3. Q:Is your price competitive?
A: Only good quality machine we supply. Surely we will give you best factory price based on
superior product and service.
Hot Tags: peanut butter colloid mill machine, China peanut butter colloid mill machine manufacturers, suppliers, factory
You Might Also Like
Send Inquiry