Hummer Mill

Hammer mill is a necessary equipment for the early production of many industries, especially in the pharmaceutical, feed, food, paint, chemical industry. It has a wide range of versatility, can adjust the fineness of grinding, with high production efficiency, low energy consumption, safe use, easy maintenance and other advantages, so it has been favored by all walks of life.

The crushing effect of the hammer mill is mainly assessed by the fineness of the crushing, the output per unit time of the crushing process and the unit energy consumption of the crushing process. These indicators depend on the physical properties of the crushed material, the structure of the mill, the shape of the crushing chamber, the number, thickness and linear velocity of the hammer, the shape of the screen and its aperture, the gap between the hammer and the screen surface, and other factors.

The hammer millmainly relies on the impact to break the material. The material enters the hammer crusher, suffers the impact of the high-speed rotating hammer head and is crushed, the crushed material, obtains kinetic energy from the hammer head of the hammer breaking machine, rushes from the high-speed frame body baffle, screen bar, at the same time, the material collides with each other, is broken many times, is less than the gap of the screen bar material, discharged from the gap, individual larger material, again by the hammer impact on the screen bar, Grind, extrude and break, the material is extruded from the gap by the hammer head of the hammer breaking machine. To obtain the desired granularity of the product

It is suitable for crushing medium hardness and brittle materials in mining, cement, coal, metallurgy, building materials, highway, burning and other industries. The hammer crusher is used to break all kinds of medium hard and weak abrasive materials. The compressive strength of the material does not exceed 100MPa, and the moisture content is less than 15%. The materials to be crushed are coal, salt, white, gypsum, brick, limestone, etc. It is also used to break fiber structure, scrap wood, paper or asbestos cement with strong elasticity and toughness to recover asbestos fiber, etc. The equipment can adjust the grate gap according to user requirements and change the discharge particle size to meet the different needs of different users.

The maintenance of the machine is an extremely important regular work, it should be closely coordinated with the extremely operation and overhaul, there should be full-time personnel on duty inspection.
Maintenance of machine
1, bearing the full load of the machine, so good lubrication has a great relationship to the bearing life, it directly affects the service life and operation rate of the machine, so the injection of lubricating oil must be clean, the seal must be good, the main oil of the machine:
(1) rotating bearings;
(2) roll bearing;
(3) All gears;
(4) movable bearing, sliding plane.
2, the newly installed tire is easy to loose and must be checked frequently.
3, pay attention to the work of each part of the machine is normal.
4. Pay attention to check the wear degree of easily worn parts, and pay attention to replacing worn parts at any time.
5, put the chassis plane of the mobile device, should be out of the dust and other things to avoid the machine encounter can not be broken when the movable bearing can not move on the chassis, resulting in serious accidents.
6, bearing oil temperature rise, should immediately stop to check the cause to be eliminated.
7. If there is impact sound when the rotating gear is running, it should be stopped immediately for inspection and eliminated.
Installation trial
1. The equipment should be installed on a horizontal concrete foundation and fixed with foot bolts.
2, installation should pay attention to the main body and horizontal vertical.
3. After installation, check whether the bolts in each part are loose and whether the main engine door is fastened. If yes, please tighten it.
4. Configure the power cord and control switch according to the power of the equipment.
5, the inspection is completed, the empty load test, the test can be normal production

1.Q: What about the after-sale service?

A: We provide 12 months quality warranty after dispatch,and some free easy abrasion spares of machine,we also provide long time free technical advisory services and technical consulting services during life long time,we will dispatch our engineer to go aboard to provide technical service if it is necessary.

2.Q: When we receive your machine ,is there any other Accessories we will get?

A: Yes,we will supply some tools for installation and maintenance.And some seal rings which you will need to replace during future normal use.

3.Q:Can your products be customized?

A: Yes, we have a professional team which has rich experience in hydraulic press machine for waste metal recycling,so we'll try our best to satisfy your requirement.

Hot Tags: hummer mill, China hummer mill manufacturers, suppliers, factory, Herbal Powder Grinder, Chemical Grinder, Universal Crusher, Conical Screw Mixer, Fish Feed Pellet Dryer, Automatic Powder Packing Machine