In China's traditional Chinese medicine production industry, because when grinding, the use of general equipment can not be completely crushed, so it is necessary to use the laboratory ultrafine grinder. The role of the laboratory ultrafine grinder is to break the cell wall of the Chinese medicine, so that the effective ingredients of the Chinese medicine are completely leach. From the degree of Chinese medicine cell crushing.
The laboratory ultrafine crusher is export-oriented high-speed crushing, the material enters the crushing chamber, and is crushed by the rotating hammer to obtain the ideal crushing effect. The crushed material automatically enters the collection bag, and the dust is recovered by the vacuum box through the cloth bag. Cell level ultramicropulverization of traditional Chinese medicine refers to the pulverization of biological cells for the purpose of breaking the wall, it is not to crush fineness as the purpose, but to pursue the cell breaking rate. There is no dust flying in the production process, the helpful ingredients in the cell are fully exposed after the cell is broken, and the release speed and amount of the drug will be greatly increased, reducing the cost of the enterprise. Only a very small number of intact cells were observed under the microscope after the particles were pulverized at the cellular level.
This series of machines has the following characteristics:
1, the movement of the laboratory ultrafine grinder is unidirectional high-speed continuous rotation, by the motor → belt drive → active disk for high-speed rotation movement, the use of a single belt rotation, high-speed rotation has a smooth transmission.
2. The front cover of the laboratory ultrafine mill must be opened after shutdown to clean the inner cavity of the machine and ensure the cleanliness of the machine working surface.
3. The crushed material can be discharged directly in the abdomen of the machine.
4, the thickness of the degree of grinding can be achieved by different aperture sieve.
Causes of failure of laboratory ultrafine mill
Elimination method (Power must be cut off to perform the following operations)
The motor does not rotate after the laboratory ultrafine mill is powered on
1, laboratory ultrafine mill power supply contact is poor or loose plug.
2. The power switch is in poor contact
3, the micro-switch contact is poor
4. The thermal protector fails
1, repair the power supply or replace the connector
2. Repair or replace the switch
3, adjust the micro switch
4, replace the laboratory ultrafine mill heat protector
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com.
