Coarse crusher common problems and treatment methods

Possible causes: The power supply is faulty, the battery is insufficient, and the engine parts are faulty.

Solution: Check whether the power cable is connected correctly, whether the battery is fully charged, and whether the engine parts are damaged. If there is no problem above, you need to ask professional maintenance personnel to help check.

Possible causes: long service life, poor use environment, poor equipment quality, etc.

Treatment method: Check the degree of grinding wheel wear, if it exceeds the specified range, it is necessary to replace the grinding wheel; If a fracture is found, the full set of rollers needs to be replaced. At the same time, take appropriate maintenance measures to extend the service life of the equipment.

Possible causes: the clearance of the roller is too large, the equipment is not adjusted equally.

Treatment method: Adjust the clearance of roller to keep the equipment working smoothly; At the same time, the equipment is leveled to reduce vibration. If the above measures are ineffective, you need to ask professional maintenance personnel to help check.

Possible causes: long-term use, poor use environment, etc.

Treatment method: Replace the seals in time to maintain the tightness of the equipment; Perform regular maintenance on the equipment and clean the surface of the equipment in time to reduce corrosion.

Possible causes: long-term use, excessive bending, etc.

Solution: Replace the power cable in time to ensure normal and reliable power supply. Avoid excessive bending of the power cable, which may increase the risk of damage.

Possible causes: long-term use, excessive bending, etc.

Solution: Check the equipment parts regularly, find problems in time to replace; Avoid placing heavy objects on the device to reduce parts bending.