First, the Chinese medicine crusher can not start
1. Power problem: First of all, you need to check whether the power plug is firmly inserted and whether the power regulator is working properly.
2. Protection device action: When the machine fails during operation, the electronic control protection device will automatically act, and the protection device needs to be reset at this time.
3. Motor failure: It may be that the motor coil is aging or disconnected, and the motor needs to be replaced.
Second, the noise of the Chinese medicine grinder is too large
1. Tool wear: Check whether the tool is worn, such as excessive wear, need to replace the tool.
2. The device is unstable: Check whether the device is loose or skewed and reinstall it.
3. Bearing wear: Check whether the bearing is worn, if found wear, need to be replaced in time.
Third, the Chinese medicine grinder produces odor
1. Incomplete cleaning: The equipment should be cleaned before and after use, such as incomplete cleaning or improper use will lead to odor.
2. Overload operation: Some shredders are equipped with load protection devices, which will produce odor when overloaded operation.
In summary, when the Chinese medicine crusher cannot work normally, it is necessary to investigate and solve the problem from the above aspects. At the same time, it is necessary to clean and maintain the equipment in time during use to ensure the normal operation of the equipment.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com/products.
Our WhatsApp:+86 15896498575
E-mail：info@cnfyjx.com
