The crusher is a general crushing equipment commonly used in pharmaceutical, grain, chemical and some processing plants. And easy to operate, easy to maintain, more and more recognized by customers.
In the pharmaceutical crushing process, the crusher has an important position, and has the advantages of simple operation and maintenance, but the enterprise has to pay attention to the problem of multi-functional crusher bearing overheating. It is understood that the bearing is an essential part of every machine, the same is the multi-function grinder, the existence of the bearing, can directly affect the normal operation of the equipment and production efficiency. Therefore, usually in addition to the maintenance of the multifunctional crusher with its bearings also need to be maintained together.
Although the crusher has such a strong market performance, in the process of use, sometimes it will face the problem of bearing overheating.
"Bearings work for a long time is always prone to overheating, if such a phenomenon occurs, it is necessary to deal with early to prevent damage." Some experts say so.
Let's solve the problem of bearing overheating of multi-function crusher together.
1, 2 bearing seat uneven, or motor rotor and crusher rotor different heart, will make the bearing affected by additional load, resulting in overheating of the bearing. In this case, it is necessary to immediately stop using the multi-functional crusher and troubleshoot to avoid early bearing damage.
2, the bearing cover with the shaft is too tight, the bearing with the shaft is too tight or too loose will lead to the bearing overheating. Once this problem occurs, there will be a grinding sound and obvious swing in the operation of the equipment. The multi-function crusher should be stopped and the bearing removed. Trim the friction area and reassemble as required.
Too much lubricating oil in the bearing, too little or aging is also the main cause of overheating and damage to the bearing, therefore, according to the requirements of the instruction manual on time and quantitative filling of lubricating oil, general lubrication accounts for 70%-80% of the bearing space, too much or too little is not conducive to bearing lubrication and heat transfer.
The crusher has simple structure, strong, stable operation, fast and uniform crushing material, and good effect. And all made of stainless steel material, all the tooth grooving inside the shell (crushing tank) by precision machining to achieve smooth surface, easy to clean, change the ordinary grinder inner wall rough, easy to accumulate powder, difficult to clean the phenomenon, so that food, medicine, chemical production in line with GMP requirements.
In addition to paying close attention to the overheating problem of bearings in the process of using multi-functional shredders, enterprises should also pay attention to the maintenance and maintenance problems during use. For example, check whether the components are firm before each use. Replace the screen, wash the crusher should pay attention to avoid water rushing into the motor, electrical appliances and bearings, so as not to affect the service life, always pay attention to maintain the cleanliness of the crusher. In order to extend the service life of the bearing, lubricating oil should be added in time.
The crusher should be overhauled once every six months, etc., in daily use and production, it should also pay attention to every detail, so as to extend the life of the multifunctional crusher and play a greater role in the pharmaceutical production process.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com/products.
Our WhatsApp:+86 13382278726
E-mail：Ben@cnfyjx.com
