Vacuum packaging machine vacuum packaging of items to prevent oxidation, mildew, moth, rot, moisture, etc., with the development of technology, there has been a fully automatic vacuum packaging machine that can be unmanned automated packaging, then what is the use of fully automatic vacuum packaging machine?
1. Preparation before use
(1) Equipped with power supply to meet the requirements of the model
(2) Check whether the position of the oil surface of the vacuum pump is correct, if it is incorrect, it should be adjusted
(3) Ground the machine well, turn on the power supply, turn on the power switch, close the cover, and check whether the vacuum pump operates normally.
2. Adjustment before use
(1) Select the vacuum degree, the pumping time is 0-99.9 seconds digital display continuous adjustable, small vacuum machine, the pumping time is digital rotary 0-60 seconds adjustable, adjust the length of the pumping time.
(2) Select the heating temperature, select the required heating temperature according to the packaging bag material, and adjust the heating temperature knob to the corresponding position, high or medium or low.
3) Adjust the heating time, heating time 0-9.99 seconds digital display continuous adjustable, according to the used packaging materials and heating temperature, adjust the heating time knob, select the heating time.
(4) According to the need to select the silicone word sealing silicone rubber strip mouth, set the sealing date and other characters
3 uses
(1) Turn on the power switch
(2) Open the bag strip, put the bag into the packaged goods into the work room, place the seal flat on the silicone rubber strip, do not overlap the bag, turn over the bag strip, and press the mouth of the bag
(3) Hold the handle (or press the edge of the top cover) to press the studio, close the cover, the machine will automatically complete the vacuum packaging process and automatically open the cover according to the program.
(4) Open the packing bag and take out the packing bag, that is, complete a work cycle.
(5) When stopping work, turn off the power switch and pull out the power plug to avoid the solenoid valve being burned for a long time
1, keep the vacuum packaging machine use environment clean, the use of the environment should not be too humid, do not use the vacuum packaging machine in flammable, explosive and other harsh environment.2, the vacuum packaging machine should be used in the temperature -10-50C, relative humidity greater than 85% of the environment; Because the ambient humidity is too high, the electrical components in the equipment will be damaged and the service life of the equipment will be reduced
3, the maintenance of the machine should be unplugged to prevent electric shock.
4, three-phase four-wire machine should be configured with the same type of socket that matches the machine power supply, and should meet the requirements of three groups of four-wire power supply, single-phase machine should be equipped with a three-pole power socket, and ensure that the machine is reliably grounded.
5, keep the vacuum part of the best clean state, and regularly wipe the machine inside, the oil of the vacuum pump, can only be added to the vacuum pump oil window two-thirds of the position, and strictly according to the vacuum pump instructions for use and maintenance.
6, the direct packaging machine should be used before the technical personnel to carry out the corresponding training, because the equipment before the factory, the control system technicians will debug, without discussing the training, to change the equipment, if improper operation, there may be equipment does not run, the control system chaos phenomenon.
To learn more about our Fangyuan products, please click this link : https://www.fine-mill.com.
