In view of the problem of metal crusher dust, you can add a small amount of water at the feed port, regularly check the dust collector, install the dust removal device on the belt machine, and pay attention to the quality and technology of the dust collector. Specific prevention methods are as follows:
1. A small amount of water can be added to the feed or discharge port to reduce the dust caused by the powder leakage during the operation of the roll crusher.
2. Check the dust collector regularly, because if the dust collector is blocked and the ventilation is not good, it will cause serious pollution to a large amount of dust and the environment, especially when crushing high humidity materials, pay attention to the ventilation conditions of the bag dust collector, and the dust collector should be placed on the vent.
3. After starting the roller crusher, the crushed material is transported by the belt conveyor. If the belt conveyor delivers the material on time, the material will enter the roll crusher, so a dust removal device can be installed on the belt machine to prevent dust from entering the roll crusher material.
4. Pay attention to the quality and technology of the dust collector, especially the quality of the parts and the transformation of the dust removal pipeline. The fault frequency of dust collector is high, which affects the normal dust removal. The elbow design of the dust removal pipe should be designed as large as possible. In this way, the dust resistance is small and the dust removal effect is better.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com/products.
Our WhatsApp:+86 18115325508
E-mail：Johnson@cnfyjx.com
