Stainless steel crusher is suitable for Chinese herbal medicine, chemical materials, ore with low hardness and polystyrene, polypropylene, nylon, engineering plastics and polychlorine foam soft material waste, defective products or injection nozzle crushing. If the corresponding screen plate is replaced and the blade gap is adjusted, various plastic waste products such as blow molding film, calendered film, thin sheet, thin sheet, mineral water bottle can also be broken.
1, product characteristics In the crushing processing of food, medicine, chemical, feed, scientific research and other industries, affected by the different shapes of the original materials, the size of the volume and the physical state, it is difficult to feed and difficult to process. According to these characteristics, we have specially developed all stainless steel crushers. The machine is not limited by the viscosity, hardness, softness of the material, and can be broken well for any material.
2, the main use of this machine is mainly suitable for food, medicine, chemical industry, hard, containing fiber and other difficult materials for crushing processing, including wood, fresh bone, plastic, etc., can also be used as a micro-grinding processing process before.
3, the machine is limited to the principle of the machine and the material of the tool, shall not be used for breaking metal, high hardness of ore, high density of wood and other hard materials.
Knowledge of proper use and maintenance of the crusher:
1. Preparatory work before crusher use: check whether the connection bolt is loose, whether there is debris in the crushing chamber, whether the lubricant of the rotating bearing and other rotating parts is sufficient, whether the belt of the transmission device is uniform, the starting phenomenon, whether the junction box and the grounding device of the motor are firmly connected, ensure that the protection device of the transmission mechanism is intact, and check before starting the machine. After inspection, make sure that all parts of the machine are in good condition before starting work.
2, crusher maintenance work on time: regularly check the fastening of bolt connection points of each component, tighten loose bolts in time; Clean the screen in the work room after each work, discharge excess materials and blockages; Regularly check the wear degree of the fragile parts of the machine, timely replace the severely worn parts, ensure that the feed is uniform, not too much or too little, to prevent the machine from overspeed. Load operation phenomenon; The lubricating oil should also be kept clean, and the bearings should be cleaned regularly to ensure the flexibility of the bearings.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com.
Our WhatsApp:+86 15896498575
