Multifunctional mill is mainly used in pharmaceutical, chemical, food and other industries. The material in the crushing chamber can be broken and crushed by using the relative motion of the movable and fixed tooth plates and the mutual impact between the materials. After crushing the material because of fine powder, easy to flow in the air, it will produce soot emissions, pollute the air, seriously affect our breathing. In the early stage of industrial development, due to the lack of reasonable control of smoke and dust, our pollution is becoming increasingly serious, so we pay more attention to this problem and solve air pollution. Now researchers have developed a machine that can quickly and effectively reduce the pollution caused by soot emissions. Let's introduce the dust collector below.
The equipment that separates the dust from the flue gas is called the dust collector or dust removal equipment. It is mainly composed of ash hopper, filter chamber, clean air chamber, bracket, lifting valve, ash blowing device and so on. During operation, the dust-containing gas enters the ash hopper through the air duct. The large particles of dust fall directly into the bottom of the ash hopper, and the smaller dust enters the filter chamber with the air flow turning up, and is blocked on the outside surface of the filter bag, and the purified flue gas enters the bag, and enters the outlet through the bag mouth and the clean air chamber, and is discharged by the exhaust outlet.
The performance of the dust collector is expressed by the amount of gas that can be processed, the resistance loss of the gas through the dust collector and the dust removal efficiency. At the same time, the price of the dust collector, the cost of operation and maintenance, the length of service life and the difficulty of operation management are also important factors to consider its performance. The dust collector is widely used in modern industrial production, such as the universal mill, grain mill, stainless steel mill, etc., which can be adapted to the special use requirements of users and the special physical and chemical properties of the crushed material.
The main function of the dust removal machine is to remove the dust through the ash hopper, filter chamber and other equipment, so that the harm caused by the smoke of the process production products will be lower, and it is also a good guarantee for the personnel. Through the above introduction of the dust collector, I hope to provide help for users.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com/products.
Our WhatsApp:+86 13382278726
