The crusher uses the high-speed relative motion of the movable tooth plate and the fixed tooth plate, so that the crushed material is crushed by the comprehensive effect of tooth impact, friction and impact between materials. The machine has simple structure, strong, stable operation and good grinding effect. The crushed material can be discharged directly from the grinding chamber of the main machine. The particle size can be obtained by replacing the mesh screen with different apertures. The inner wall of the casing is machined to achieve smooth surface, which changes the phenomenon of rough and powder accumulation in the inner wall of the previous models, making the production of drugs, food, chemical industry and other products more in line with national standards and meet the requirements of GMP.
The mill is suitable for pharmaceutical, chemical, metallurgy, food, construction and other industries. Processing hard and difficult to crush materials, including plastics, copper wire, Chinese herbal medicine, rubber, etc., can also be used as a supporting equipment for the processing process of micro mill and ultrafine mill. The powder collecting chamber adopts a completely closed noise reduction structure, which can effectively reduce the working noise. The machine is equipped with a cooling device to reduce the machine temperature and work more smoothly. The motor speed of the machine is 5000 RPM. This machine is made of stainless steel material, with strong wear resistance and corrosion resistance, suitable for processing and corrosive materials. The machine adopts the impact crushing method. After the material enters the crushing chamber, it is impacted by six movable hammers with high speed rotation, and crushed by the tooth ring and the material colliding with each other. The crushed material enters the powder bag through the screen with the help of the air flow, leaving no residue. It has the advantages of high efficiency, low noise, reliable working performance and product quality, safe operation, drug hygiene and small loss.
The material of the crusher is sent into the crushing chamber by the feed hopper, and the impact of the blade and the knife seat, the rotary knife and the fixed knife are shear and crushed at the same time, and the material is automatically discharged from the exit due to the action of the rotating centrifugal force.
Note: Because the material difference is very large, so its output difference is large.
Operation and precautions
1. Before use, check whether all fasteners of the machine are tightened and whether the belt is tensioned.
2, the spindle running direction must be in line with the direction of the arrow shown on the protective cover, otherwise it will damage the machine and may cause personal injury.
3, check whether the electrical appliances are complete.
4, check the machine crushing room for hard debris such as metal, otherwise it will break the tool and affect the operation of the machine.
5, the material must be checked before crushing, do not allow hard metal debris mixed in, so as not to break the tool or cause burning and other accidents.
6, the oil cup on the machine should be often injected with lubricating oil to ensure the normal operation of the machine.
7, stop feeding before stopping, if you do not continue to use, to remove the contents of the machine.
8, regularly check whether the tool with the screen is damaged, if there is damage, should be replaced immediately.
9, there will be small vibration when using, be sure to tighten the cover connection handle to avoid accidents.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com/products.
