The particle size of the test material below 5mm is crushed, and the maximum fine size of the crushed test material can reach 200 mesh. Reasonable structure, can be continuously added to crush. It is equipped with two vertical opposite grinding disks, one of which is fixed, and the other grinding disk crushes the sample when it rotates, which is the excellent grinding equipment in China at present.
Small pulverizer ultrafine pulverizer φ175 Grinding equipment Vertical pulverizer parameters:
Disc diameter (mm) :φ175
Feed size (mm) :≤6
Discharge particle size (mm) :0.1
Crushing capacity (kg/h) :25
Production (kg/h) :50 ~ 400
Motor power (kW) :1.1
Structure and working principle:
1, disc grinder EGSF-Iφ175 is mainly composed of body, base, spindle, movable grinding disc, fixed grinding disc, end cover and hopper.
After the motor is started, the power is transmitted to the belt pulley through the triangle belt, which drives the main shaft to rotate, and makes the relative motion of the movable grinding disc fixed on the grinding disc produce extrusion consultation effect, so that the material entering the middle of the grinding disc is crushed. The discharge grain size can be adjusted by the size of the hand wheel, the main shaft, etc. to control the grain size.
The body, the end cover and the upper cover constitute a studio, and the material is crushed in the work room. The material is added from the feeding mouth above the end cover and enters the middle of the two grinding disks. The sample is crushed due to the squeezing and grinding effect, and the crushed sample flows out from the gap between the two grinding disks. It falls into the hopper below.
2, the principle of the adjusting mechanism is to loosen the big hand wheel, rotate the small hand wheel, so that the adjusting screw rotates and drives the spindle, so that the active disk moves forward or backward. Thus, the gap between the two grinding disks is adjusted to achieve the purpose of adjusting the size of the material.
3, disc crusher EGSF-Iφ175 stable performance, low noise, easy cleaning. The grinding disc is made of high manganese steel, wear-resistant and durable.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com.
