The crusher uses the relatively high speed operation between the movable tooth plate and the fixed tooth plate, so that the crushed material is crushed by the impact of the tooth plate, friction and the collision between the materials. The pulverized material can be discharged directly from the grinding chamber and come out through the discharge port. The material is collected into a cloth bag after being crushed. The pulverized material is collected in the bag, and the air comes out from the small holes of the bag, and the fine powder will not be discharged, so as to achieve the effect of no waste and no pollution. The thickness and particle size can be changed to adjust the screen with different mesh numbers.
Dust removal mill operation precautions:
1. The external power supply should be equipped with a suitable circuit breaker according to the machine power, the purpose is to automatically cut off the power supply when the machine load is too large and the current is too large to protect the motor!
2. Ensure that the dust removal mill is under special care when working.
3. The crushed material particles should not be too large, such as the stuffy machine (that is, the machine due to excessive load causes the speed to significantly slow or passively stop running), should immediately cut off the power supply.
4. If the crushed particles are too large, it should be broken by the crusher, and then crushed by the dust removal crusher
5. Do not crush metal, especially strong and high viscosity materials.
Maintenance and maintenance of the mill:
1. Check the parts and fasteners before each use.
2. Replace the screen, wash the mill should pay attention to avoid water rushing into the motor, fan control box and bearing, so as not to affect the service life, always pay attention to maintain the cleanliness of the mill.
3. In order to extend the service life of the bearing, lubricating grease should be added in time, lubricating ZL-1 lithium grease, oil cup is provided above the bearing seat for pressure injection grease.
4. The whole machine is repaired once every six months.
To learn more about our Fangyuan products, please click this link：https://www.fine-mill.com/products.
