There are many types of mill, mainly designed for crushing samples, such as feed mill, wheat mill, etc., is the use of the most common two instruments. The crusher can pulverize wheat, corn, rice and other crops at high speed, and plays an important role in sample pretreatment. A good crusher can also preserve the protein and fat content of the plant without being destroyed, therefore, the choice of the right crusher, as well as the rational use of the crusher, is a major impact. Wheat shredders are also used quite frequently in agriculture.
First of all, choose the installation position of the crusher and the power machine. Long-term fixed operation, the unit should be fixed on the cement base; The unit must be securely installed. Reliable without loosening; The belt pulley of the two machines should be in a straight line and should not be deflected. After the base is fully solidified, the static inspection of the unit is carried out repeatedly and comprehensively, and then the dynamic no-load test run is carried out for 3~5min. If there is no abnormal phenomenon, it can be put into formal operation. If electricity is used as power, professional electricians should be found for reasonable layout of the lines. Power lines and facilities shall be standardized and neat, and shall not be installed or used without permission.
After the crusher is put into operation for about 10d, the cover should be opened, the rotor, the hammer and other moving parts should be checked, the connection screw is firm, check whether the bearings are well lubricated, if there is a stuck, friction phenomenon to be eliminated in time. In the operation to carefully check the processing materials, ask whether there are nails, stones, iron wire and other hard objects, so as not to cause injury accidents. The operator is strictly prohibited to wear gloves, and should stand on the side of the crusher when feeding materials, so as to avoid bouncing debris on the face; Do not grip long stalk crops too tightly to prevent accidents.
In the process of operation, pay close attention to the working conditions of the crusher, if there is vibration, abnormal noise, bearing and parts of the temperature is too high and outward spraying phenomenon, should immediately stop the inspection, troubleshoot before continuing to work. When blockage occurs and the load is too heavy, the machine should be shut down immediately. It is strictly prohibited to force feeding with sticks or hands to avoid injuring the arm and damaging the machine. Check and maintain the unit after each shift to ensure that the unit is often in good condition.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com.
