Frozen crusher is the combination of freezing and crushing two processes, so that the material is crushed in the state of low temperature freezing, which greatly retains the original nutrient composition and activity of the raw material, therefore, we often use the frozen crusher for the crushing of materials in medicine, food and other industries, which helps the human body to absorb various nutrients.
Main member
The freezing crusher is mainly composed of a refrigerant supply device (liquid nitrogen tank), a storage tank, a raw material freezer, a spiral propeller, a low-temperature crusher, a product collector (cyclone separator), a sensible heat recovery device, etc.
Scope of application
Freezing crusher in medicine, food, chemical, petroleum, rubber, plastics, dyes, coatings, electronics and other industries to crush materials under low temperature freezing.
Working principle
The cold crusher uses the low temperature brittleness of the material, that is, the hardness and brittleness of the material increase with the decrease of temperature, while the plasticity and toughness decrease. It can be crushed with a very small force in a cryogenic freeze. First, the material is frozen at low temperature to the glass transition temperature or embrittlement temperature below, and then crushed with a grinder. In the process of rapid cooling of food, it will cause uneven contraction of various parts of the internal stress, under the action of this stress, the weak parts of the material will produce micro-cracks and lead to the reduction of the binding force of the internal organization, so that the internal cracks will expand rapidly and break under the small external force.
Process flow
Raw materials - > Pre-treatment - > Low temperature freezing (-100°C liquid nitrogen)- > Low temperature grinding -→ Product collection -→ vacuum freezing sublimation drying - product post-treatment -→ Packaging → finished product

Equipment characteristics
1, meet the crushing effect of the material that is ductile and difficult to crush at normal temperature, and the flammable and explosive material can also be crushed at low temperature; 2, through the frozen crusher can be made than normal temperature powder particle flow better, better particle size distribution products; ?
3, the use of frozen crusher, will not occur at room temperature grinding due to heat, oxidation caused by metamorphism; ?
4, the frozen crusher will not occur odor escape, dust explosion, noise and so on.
Precautions for use
1, before use, check whether all the fasteners of the frozen crusher are tightened, and whether the belt is tensioned;
2, the spindle running direction must be in line with the direction of the arrow shown on the protective cover, otherwise it will damage the machine, and may cause personal injury;
3, check whether the electrical appliances are complete;
4, check whether there are hard impurities such as metal in the crushing room, otherwise it will break the tool and affect the operation of the freezing mill;
5, the material must be checked before crushing, do not allow hard metal impurities mixed in, so as not to break the tool or cause burning and other accidents;
6, the oil cup on the machine should be often injected with lubricating oil to ensure the normal operation of the machine;
7. Stop feeding before stopping. If you do not continue to apply, remove the contents of the machine;
8, regularly check whether the tool with the screen is damaged, if there is damage, should be replaced immediately;
9, there will be small vibration when using, be sure to tighten the cover connection handle to avoid accidents.
To learn more about our Fangyuan products, please click this link : https://www.fine-mill.com.





