With the continuous progress of the mechanical industry, the turbine mill has developed to the third generation of models, is not the original look oh, it increases the water cooling device, you can also customize the turbine mill Shakron, pulse dust collection device according to your own needs, together to understand the purpose of the turbine mill, the structure of the working principle!
Turbine crusher uses:
Mainly applicable to pharmaceutical, chemical, food (example: Ginger, pepper, pepper, oilwheat, soybean, star anise, cinnamon, dried vegetables) and other low hardness materials crushing processing, fineness between 30-150 mesh adjustment, with high yield, fine particle size, low noise, low energy consumption, easy maintenance, easy installation and other advantages, especially suitable for oil, viscosity, heat sensitive, fiber and other low hardness materials crushing processing.
Working principle and structure of turbine mill:
1. Working principle: Inside the machine, the grinding rotor composed of 4 groups of cutters with a total of 56 blades is supported on the bearing seat of the left and right end cover for high-speed rotation, so that the solid material particles are squeezed, torn, collided, shear and other mechanisms between the tooth lining plate and the blade in the inner cavity, so as to achieve the purpose of crushing; The high-speed rotation of the large and small impellers at both ends of the rotor, through the cavity form eddy current effect between the inlet and outlet, so that the crushed particles are smoothly imported (large clearance) to (small clearance), to achieve crushing and refining. In order to limit the temperature in the cavity to be too high, improve the crushing efficiency, and prevent the particles from sticking to the cavity, sticking knife, plugging teeth and clumping, four sets of wide cavity water jacket on the surface of the cavity are forced to cool the water, so that the temperature in the cavity is controlled at a low limit. Bearing components are fitted with a special labyrinth seal, which can effectively prevent dust from entering the bearing chamber, thus extending the service life of the bearing. The door is equipped with silicone rubber sealing ring, no dust leakage and pollution of the operating environment.
2, structure: turbine crusher is mainly composed of shell, door, turbine, spindle, screen, pulley and motor and other parts.
Turbine crusher Features:
1, crushing ability is strong, low energy consumption, the product is relatively small fineness.
2. The crushing space is large, and the high wind pressure generated when the turbine is running can not only improve the production capacity, reduce the over-crushing phenomenon, but also effectively avoid the deposition and blockage of the screen during the crushing process.
3. Due to the enhanced shearing, the crushing capacity of fibrous materials is higher than that of ordinary equipment.
4, the installation of the screen is convenient, the positioning is reliable, and the screen is inserted. The service life is much higher than the ring sieve form.
5, the design of the built-in motor, so that the center of gravity of the machine is reduced, effectively reduce the equipment noise.
6. The bearing seat and chamber of 300 400 type and above turbine mill are equipped with water cooling device, which can effectively prevent the crushing chamber from heating up too fast and too high, and is suitable for crushing some heat-sensitive materials, including those that will become soft or even dissolve at lower temperatures.
To learn more about our Fangyuan products, please click this link：https://www.fine-mill.com/products.
