What is the working principle of pepper crusher?
During the production and operation of the pepper mill, the motor drives the spindle and the turbine to rotate at high speed. The turbine and the grinding block on the screen ring form a crushing and grinding pair, which has a compact structure. When the pepper enters the machine cavity through the hopper, the pepper entering the machine cavity is tightly rubbed and strongly impacted to the inner edge of the turbine blade in the rotating air flow, and is ground again in the gap between the blade and the grinding block. As it crushes and grinds the peppers, the turbines suck in a lot of air, which cools the machine, grinds the peppers and transports the bits. The fineness of the pepper crush depends on the size of the screen, as well as the amount of pepper fragments and air passing through. The bearing part of the pepper mill is equipped with a special maze seal, which can effectively prevent the pepper fragments from entering the bearing chamber, thus extending the service life of the bearing. The door is equipped with two O-shaped rubber seals, no dust leakage and pollution of the operating environment.
What are the uses of pepper crusher?
Pepper crusher can crush Chinese medicinal materials, plant roots, stems, leaves, flowers, fruits, Bark, grain, wheat bran, ground potato, sesame, corn cob, grain, shrimp skin, seaweed, dehydrated vegetables, dried ginger, garlic slices, spices, dates, plastics, chemical raw materials, mica, graphite, bentonite, perlite, charcoal, activated carbon, cellulose, tea, soybean meal, cow skin, sheepskin, fruit shell, etc. (Note: flammable and explosive materials, wet materials can not be crushed)
What are the characteristics of pepper crusher?
1, high fineness, strong adaptability to the material, because the machine adopts a unique grinding method, especially difficult to crush fiber, high toughness materials, high hardness materials, can obtain good crushing effect.
2, good stability, low noise, the machine adopts the "uniform force" design structure, so no vibration, no need to fix, very easy to use.
3. No dust, low loss, easy to clean, high safety performance, the machine adopts a completely closed design structure, no dead Angle; The lower part of the grinding chamber is lined with wear-resistant stainless steel plate, and the dust cover is set in the center to effectively prevent dust from entering the motor; The grinding tile and the knife group are easy to disassemble, which is conducive to cleaning and preventing the sticking between different materials. Without fan, the air flow is caused by the rotation of the knife group, so there is no dust and no additional dust removal equipment is required.
4. The screen is made of hard stainless steel by precision drilling, with large hole density and good powder permeability.
How to use the crusher?
1. For the material crushing process, the dust removal requirements are not high, you can choose a single machine, according to the actual needs of the work site, you can choose a vertical or horizontal single machine.
2. In the production process, dust removal is needed, but it is not necessary to wedge into the line for continuous blanking work, ordinary dust removal can be selected, and continuous blanking can be selected for automatic blanking.
3. Large machines, need continuous flow type work, or work with other equipment, you can choose split cyclone dust automatic blanking (with electromagnetic pulse), high production capacity, good dust removal effect, positive pressure and negative pressure two, according to your company's specific crushing requirements and material differences and so on contact our business department selection.
How to install pepper mill?
1. Install the body on the frame, install the feed hopper and the lower hopper, and tighten the screws. Install the motor, the motor wheel and the machine wheel in the same plane, and the triangle belt tightness is moderate.
2, line, switch reliable, stable working voltage. The cable is well grounded.
3, the machine turntable tightening, round teeth, flat teeth tightening. The spindle rotates flexibly and attaches to the rotation direction of the machine after being connected to the power supply (the motor direction can be adjusted according to the wiring diagram), and the machine can be fed without abnormal sound for several minutes after running empty.
4, the self-matching power should make the crusher spindle speed reach the technical data.
How to maintain pepper mill?
1, often check the fastening of each component to prevent it from loosening and falling off, damaging the machine.
2. The oil injection holes should be refuelled frequently, and the bearing parts should be cleaned and injected once every six months.
3, shutdown operation, the machine should be idled for a period of time, blow the remaining material in the machine, and then shut down.
4. When the machine is disabled, the debris outside the machine should be removed. Grease should be added to all rotating parts and stored in a warehouse with dry air and no corrosive gas.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com.
