The performance and quality of a product often have a lot to do with its design. If there are some unreasonable problems in the design of the slicer, it may lead to some failures in the later use, which will bring inconvenience to the user. So, what are the main aspects of the so-called unreasonable design? Let's look at the details.
1: During the design process, the cover plate of the inspection hole configured for our slicer is not thick enough, so that it is easy to deform after tightening with bolts, resulting in uneven bonding surface and even oil leakage from the contact gap.
Two: there is no return oil tank on the body, if there is no return oil tank, it is easy to cause the lubricating oil to gather in the position of the shaft seal, end cover, joint surface, etc., under the action of pressure difference, it will leak out from some gaps.
Three: In the case of adding too much lubricating oil, even if the slicer is in normal operation, the oil pool will stir very badly, causing the lubricating oil to splash everywhere in the machine. And if the amount of oil is particularly large, it can also lead to leakage. The fourth case is that the shaft seal structure design is unreasonable. For example, in the early days, the oil ditch and felt ring type shaft seal structure were mostly used, so that the problem of compression deformation could easily occur during the assembly process.
Four: The maintenance method is unreasonable, when the slicer has some abnormal conditions, we need to conduct timely maintenance. If there are problems such as incomplete removal of dirt on the joint surface, improper selection of sealant, and reverse installation of seals, it is also likely to cause oil leakage.
Cutting machine is also one of our main products, in the design, we will consider many aspects of the problem, only in this way to try to ensure that the design of the slicer has excellent performance, and in the later use, the probability of failure is relatively low. Otherwise, it will seriously affect the performance of the microtome.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com/products.
Our WhatsApp:+86 13382278726
