What is the principle of packing machinery
Packaging machinery is a kind of mechanical equipment used to pack and package items, which is widely used. The structure of the baler is composed of belt feeding, strip stripping, joint connection and cutting device, transmission system, track frame and control device, which is one of the necessary equipment in the packaging industry. So what is the principle of the baler?
The working principle of the baler is: when the packaged object is in the middle of the baler, the right apex of the baler rises, presses the front end of the belt, tightens the belt on the object, then the left apex rises, presses the lower belt in the proper position, the heating sheet reaches into the middle of the two belts, the middle tip knife rises, cuts the belt, and finally sends the next bundle of straps to the place to complete a working cycle. In simple terms, it is the use of strapping tape to wrap products or packages, and after tightening, the two ends of the strapping tape are connected through thermal effect melting, so as to achieve the packaging of items.
Detailed explanation of the work flow of the baler
The work flow of the baler is mainly divided into five steps:
1. Packing tape, withdrawing tape and wearing tape
The chuck rises to clamp the plastic lead, the conveyor wheel reverses the withdrawal tape, returns the excess plastic tape to the storage box, and tightens the bundle. Then, the robot clamps the plastic bag and further tightens the package to the so-called tightness
2, packaging tape bond, cut tape
The guide plate exits from the middle of the two layers of plastic belt, at the same time, the electric hot head is inserted between the two layers of belts, and then the two collets rise to clamp the other end of the plastic belt, the cutting knife cuts the belt, and pushes the lead to the hot head to contact it, the heat melts, and then the electric hot head quickly exits, the cutting knife continues to rise the surface of the melted two layers of plastic belt pressed on the pressure plate and cooled and solidified, two generations of bonding.
3. Finish packing
The pressure plate exits the secured plastic band, and each chuck is reset to complete the bundling.
4. Deliver the tape
The conveyor wheel is turning to carry the plastic tape from the storage box to the track, ready for the next binding.
5. Unloading
The above is a single strapping process, when the baler machine is in a connected state, after the completion of the conveyor directly into the unwinding tensioning procedure, according to the above procedure cycle continuous.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com/products.
