Chinese medicine crusher is suitable for small Chinese medicine factory, Chinese medicine pharmacy, Chinese medicine hospital, and also for chemical industry, mining and scientific research units, the machine has high efficiency and simple operation. The fineness of the product can reach 200 mesh, which is more effective for the valuable traditional Chinese medicine that is easy to be crushed and usually difficult to be crushed by the crusher.
How it Works:
This type of mill is the use of grinding blade high-speed rotary impact to achieve the general grinding of dry materials. It is composed of a crushing chamber, a crushing blade and a high-speed motor. Put the material directly into the crushing chamber, tighten the crushing chamber cover, and start the machine for 1-3 minutes to complete the crushing.
The Chinese medicine crusher is composed of a stainless steel upper cover and lower body crushing chamber, which is closed by screw button. Through the high speed operation of the vertical motor, the transversely mounted grinding blade is driven to crush and shear the material. The crushing object is stirred in a closed space, so the crushing effect is relatively uniform, the area is small, the packaging is convenient, the operation is simple, the structure is precise, the size is small, the weight is light, the effect is high, the cleanliness and health, the appearance is beautiful, both save electricity and safety, the noise is small and no dust pollution, is the ideal pulverizing equipment. This machine is made of stainless steel material, all the tooth slots inside the shell (crushing tank) are precision machining to achieve smooth surface, easy to clean, changing the ordinary grinder inner wall rough, easy to accumulate powder, difficult to clean the phenomenon, so that food, medicine, chemical production more in line with national standards, to meet the health requirements.

Matters needing attention
1, check whether there is foreign matter in the crushing chamber (it must be empty before starting), and turn on the power.
2. Tighten the butterfly nut of the upper cover and crushing cavity.
3, start the motor, turn the empty machine for 1-2 minutes, and then gradually feed the material from the feed tray, feeding should not be too fast.
4, if the material is stuck, the motor does not turn, please close immediately, so as not to burn the motor, after removing the material, you can continue to use.
5. It is strictly forbidden to open the top cover and reach into the crushing chamber with your hand during use.
6, this machine is a dry crusher, not suitable for crushing wet and greasy.
7. Please replace different screens according to your needs.
8, the machine adopts overheat protector, such as the motor load is too large, will automatically stop, such as continue to operate, please re-press the protector.
To learn more about our Fangyuan products, please click this link :https://www.fine-mill.com.





