Washing powder horizontal mixer is a kind of equipment used to mix and stir powdered materials such as washing powder, detergent and detergent. It is usually composed of a fuselage, a motor, a reducer, a stirrer, etc.
The working principle is to put the powdery material into the fuselage, start the motor, and the motor drives the agitator to rotate through the reducer, so that the powdery material is constantly mixed and stirred in the fuselage to achieve the purpose of uniform mixing.
The device usually has the following characteristics:
Horizontal structure, small footprint, easy to install and maintain;
Agitator adopts spiral structure to make mixing more uniform;
Easy to operate, only need to press the start button to start work;
Suitable for all kinds of washing powder, detergent, detergent and other powdery materials mixing.
The horizontal mixer is equipped with double-axis rotating reverse blades, and there is a certain Angle between the blades, which can make the material circulate and stir along the axial diameter direction, and mix quickly and evenly.
What's the difference between a horizontal mixer and a stand mixer?
2. The speed of the shaft driven by the horizontal mixer reducer and the structure of the blade will weaken the gravity of the material. With the decrease of gravity, the difference in particle size and specific gravity of the material will be ignored in the mixing process.
Horizontal mixer features
1. Horizontal mixer has high mixing uniformity and less residue, which is suitable for mixing more than two kinds of materials.
2. The horizontal mixer is equipped with a reducer, with low noise, low energy consumption, high efficiency and durable characteristics.
Three, horizontal mixer problem analysis
1. Over-stir
The user needs to check the running state of the horizontal mixer auger, if it is worn, replace it in time, if it is not worn, consider reducing the number of blades.
2. There are dead spots in the corner
Reduce the mixing amount to prevent overloading.
3. Insufficient emissions
The user needs to increase the speed of the power output device of the horizontal mixer and check the wear of the auger.
4. Uneven material mixing
Reduce the use of long hay in the material, pre-treat the material, and ensure sufficient mixing time.
Four, the working principle of vertical mixer
1. The working principle of the vertical mixer is as follows: the speed of the screw is used to lift the raw material from the center of the barrel to the top, and then the material is thrown out, and finally the horizontal mixer material will return to the bottom. Such an operation step can make the material roll up and down in the barrel, ensure that a large number of raw materials are mixed evenly in a short time, and improve work efficiency.
2. The mixing of vertical mixer can shorten the mixing time and improve the work efficiency. Even if the specific gravity and particle size of the material are different, the mixing effect can be achieved under the staggered tossing of the mixing blades.
3. Materials enter from the top of the vertical mixer and discharge from the bottom of the machine.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com.
