Dec 13, 2023 Leave a message

What are the common models of feed mixers?

Feed mixer is a mechanical equipment that uses mechanical force and gravity to evenly mix two or more kinds of materials. During the mixing process, the contact surface area of the material can also be increased to promote chemical reactions and accelerate physical changes. Common mixing machines are plow knife mixer, spiral belt mixer, no gravity mixer, V-type mixer, double spiral cone mixer, high and low speed liquid mixer and planetary power mixer.

Double helix conical mixer
Cone mixer is a new type of high efficiency and high precision particle mixing equipment, it is widely used in chemical industry, pesticide, dye, medicine, food, feed oil, metallurgical mining and other industries of all kinds of powder particles mixing.
Characteristics of double helix conical mixer

Advanced structure, convenient operation, safe and reliable operation.
The mixing speed is fast and the quality is uniform. The double helix of the machine is asymmetrically arranged, and the size expands the mixing range, so it is more suitable for the mixing of materials with different mixing ratios.
The energy saving effect is remarkable, and the energy consumption of this machine is only one tenth of that of the drum mixer.

Feed mixer.

CH


The wear and pressure feed of granular materials are small, and there is no overheating reaction to the mixing of heat-sensitive materials
The mixed preparation is stable without stratification and segregation.
The machine is sealed dust-free, easy to operate, easy to maintain and long service life. In addition, according to the requirements of the user, the pressure vessel can be formed into a pressure vessel for pressure or vacuum operation.
The autobiography and revolution of the machine are completed by a set of motor and cycloidal pin transmission reducer.
2, the working principle of the double helix conical mixer.
The rotation of the double helix causes the powder particles to move around the wall of the cone.
Due to the autobiography of the spiral blade, the powder is discharged to the center of the cone for radial movement.
The powder flows upward from the bottom of the cone and is discharged to the surrounding surface outside the spiral for material mixing.

The downward flow of powder particles caused by spiral rotation is precisely due to the combination of spiral rotation in the mixer, which forms four flow forms of powder: that is, the composite movement of convection, shear, diffusion and infiltration. Therefore, the powder can be quickly mixed evenly in the mixer. Two, horizontal double axis screw belt mixer.
Horizontal double-axis screw belt mixer is used to mix dry and powdery materials for the purpose of mixing evenly. When mixing, the material inside is moved by two rotors moving in opposite directions to carry out a compound movement. The two-axis blade drives the material along the inner wall of the groove to rotate clockwise and backward; the material near the axis center rotates axially from inside to both sides; the external spiral drives the material near the cylinder wall to rotate axially from both sides to inside. As a result, the convective circulation in the material cylinder and shear infiltration mixing are caused, and the material is quickly and evenly mixed in a short time.
1, the characteristics of horizontal dual-axis belt mixer.

U-shaped barrel structure, smooth operation, uniform mixing, no dead Angle, clean discharge, wide application range.
The mixing speed is fast and the uniformity is high.
The bearing is at both ends of the mixer, the material is not easy to enter, and the maintenance rate is low.

The screw conveyor is convenient to feed, the feed port is flush with the ground, and the feed is labor-saving and convenient.
The internal structure and the overall design materials have passed iso9001 international quality system certification.

To learn more about our Fangyuan products, please click this link :https://www.fine-mill.com.

 

Send Inquiry

whatsapp

Phone

VK

Inquiry