The crusher is a very common equipment in the crushing industry and has the role of crushing materials. Crusher operation is simple, without any special technology, a teaching can be on the job. Widely used in food, medicine, chemical industry, hard, fiber containing difficult materials for crushing processing, including wood, fresh bone, plastic, etc., can also be used as a micro-grinding processing process before.
Sometimes can often receive different new and old user feedback, buy back the crusher production capacity is not as high as expected, but there are many users say will not, the crusher production capacity is still very high. Why does the same manufacturer produce equipment, different users have different feedback on the machine capacity? Do you know what causes it? Today, I will discuss with you a few key factors.
First, whether there is strict control of the feed amount
When feeding the crusher, in addition to controlling the size, pay attention to the feeding amount. When the crusher is working, if the input of excessive material will cause the material to be broken too late, the broken material is too late to be eliminated in time, resulting in the blockage of the crusher, which affects the crusher productivity.
Second, whether the feeder is adjusted to the right Angle to improve the screening function
The vibrator is generally equipped with a grate and has the screening function, but in practical applications, it may be because of factors such as feeding Angle and amplitude, which makes it easy to block the sieve hole in the screening process and lose the original production capacity. Therefore, it is necessary to properly adjust the Angle of the feeder, give full play to the screening role of the feeder, and improve the screening function.
Third, whether to adjust the crusher discharge port reasonably
The size of the discharge port of the crusher determines the processing capacity of the equipment, and the size of the discharge port of the jaw crusher as a rough breaking equipment should be based on the feed particle size of the second section of the crushing, and the size of the discharge port can not be arbitrarily adjusted.
The above briefly introduces several factors related to the low capacity of the crusher, mastering these points can not only improve the capacity of the crusher, but also reduce the frequency of the crusher failure.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com.
