EYH-4000 series two-dimensional motion mixer
I. Overview:
Mixing of solid particles is a common mixing unit operation. Mixing of materials in the pharmaceutical industry
The combination has higher requirements: high mixing uniformity, sealed production, no cross-contamination, strict batch number management, and equipment in line with clean area requirements. The common rotary mixer has some disadvantages, such as small loading amount, difficulty in entering and leaving materials, and difficulty in cleaning. The two-dimensional mixer solves the above problems. The machine has large volume, high mixing uniformity, easy discharge, easy cleaning, in line with GMP requirements.
Ii. Main features:
1. The frame is welded by section steel, and the outer seal is stainless steel plate. Reasonable structure, can effectively stabilize the whole machine.
2, swing by the motor, belt disc, belt, cycloidal pin gear reducer, crank, connecting rod, pendulum rod composition. Sealed production, simple structure, smooth operation, noise bottom, in line with GMP requirements.
3, rotation of cycloidal pin wheel reducer, sprocket, chain, drive shaft, passive shaft composition. Sealed production, reasonable structure, smooth operation, noise bottom, in line with GMP requirements.
4. The mixing cylinder of the machine is swayed and rotated in two-dimensional space. The cylinder is supported by the roller and the stop wheel is positioned. The mixing cylinder is composed of a barrel body, a feeding end of a positive cone table, an discharging end of a positive cone table, a feeding port and an discharging port.
5, the mixing cylinder is made of stainless steel, and its inner and outer walls are polished. The cylinder body has good air tightness, smooth and clean, no dead Angle, no residue, easy to clean.
6, the feed port adopts flange, silicone rubber seal, easy to operate.
7, the discharging end adopts a positive cone table, and the discharging port is located in the lowest position when discharging, to ensure that the material can be discharged.
8, the discharge port adopts disc valve, good sealing performance, convenient discharge, simple operation, no residue.
9, the control button, simple operation, convenient, easy to maintain.
10, the machine's mixing cylinder in rotation and participate in the swing, so that the material in the cylinder can be fully mixed.
11, the machine mixing fast, mixing quantity is large, easy to discharge.
12, the detachability of the equipment is improved, which is convenient for the maintenance and maintenance of the transmission parts.
13, the height of the machine is reduced and equipped with an operating table, easy to operate, reduce labor intensity, improve production efficiency.
3. Scope of application:
The machine is suitable for pharmaceutical, chemical, food, dyes, pesticides and other industries, especially for mixing with large tonnage of various solid materials.
Four, the main technical parameters:
Model EYH-4000
Barrel volume (L) 4000
Loading capacity (L) 2000
Loading coefficient 0.5
Swing power (kw) 5.5
Rotation power (kw) 7.5
5. Configuration list:
1 Rack A3 12# channel steel
2 Rack sealing plate SUS304 δ=1.5mm
3 Cradle A3 12# channel steel
4 Cradle seal plate SUS304 δ=1.5mm
5 Mixing cylinder SUS304 δ=4mm
6 Butterfly valve SUS304 Φ250
7 Main and passive axis 45#
8 Swing system
9 Rotation system
10 Rotary reducer finished 7KW
11 Pendulum motor finished 5.5KW
12 roller Q235A/ High strength rubber
13 Sprockets, chains
Control system indicator light AC220V
Emergency stop LAY series
Switch button LAY series
Intermediate relay 2Y2T series
Contactor CJX1 series
Thermal relay NR4 series
terminal
Electric control cabinet SUS304
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com/products.
Our WhatsApp:+86 13382278726
E-mail：Ben@cnfyjx.com
