How is the swing granulator screen installed and disassembled
Screen installation process
Step1:
Thread the folded edge of the screen under the swinging head.
Step2:
Insert the two clamping tubes through the mounting holes, and insert the two folding edges of the screen to the bottom of the card slots of the two clamping tubes, and push the clamping tubes to the end.
Step3:
Turn both sides of the screen tightening handwheel at the same time to tighten the screen to the appropriate degree.
Step4:
Finally, the plexiglass panels on both sides are fixed and installed with screws.
Disassembly process of screen
Step1:
Loosen the fixing screws on the plexiglass panel and remove both sides of the plexiglass panel.
Step2:
Tighten the hand wheel on both sides of the screen to the direction of the tightening, and then loosen the ratchet buckle.
Step3:
At this point, the two clips can be easily pulled out directly.
Step4:
At this point the screen has completely fallen off, and the screen can be easily removed from under the swinging head.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com/wet-granulator/yk160-swing-granulator.html.
Our WhatsApp:+86 15896498575
E-mail：info@cnfyjx.com
