Grain mill has more than ten years of research and development and production experience, and its technology and quality are relatively mature in the health industry. As the core equipment in the grinding production line, the user friends should choose the equipment according to their actual needs, especially according to the properties of the material they want to process, such as the humidity and hardness of the material.
Because the different humidity and hardness of the material have different requirements for the performance or specifications of the mill, too large and too small of the two will have different degrees of impact on the grinding equipment. Therefore, today I will talk to you about what impact or how much impact the humidity of the material will have on the cereal mill.
Taking Xulang Mill as an example: For Xulang grain mill, the humidity of the material has certain requirements. If the humidity of the material is too high, it is recommended to dry it before grinding. Otherwise, when grinding the material, it will be easy for the material to adhere to the equipment, resulting in reduced production efficiency of the equipment, and it is easy to block the circulation air duct and the discharge port of the equipment, which will lead to the reduction of the output of the equipment, and in serious cases, it will lead to equipment damage.
Secondly, in the process of material grinding, if the water content of the material is too high, it is easy to adhere to the inner wall of the machine, causing a certain burden to the machine, so that the equipment suffers different degrees of damage. And the heat generated when the material with too high humidity enters the mill will cause the gas evaporation in the mill room to change into the gas flow rate, so that the circulating air volume increases, and ultimately leads to less powder from the equipment.
Too high material humidity will cause a series of effects on the production and use of grain mills, users in the selection of materials, must detect the humidity of the material, to meet the requirements before production and processing.
To learn more about our Fangyuan products, please click this link ：https://www.fine-mill.com/products.
