White Sugar Grinder Machine
Introduction
White sugar grinder machine is mainly suitable for chemical, dyes, additives, feed, food, medicine, wood chips, chemical fiber and non-metallic ore and other low hardness materials grinding processing, fineness between 20-120 mesh through the replacement of screen adjustment, with high output, fine particle size, low energy consumption, simple maintenance, easy installation and other advantages. Especially suitable for oil, viscosity, heat sensitivity, fiber (e.g. : ginger, red pepper, pepper, oilwheat, almond soybean, star anise, cinnamon) and other low hardness materials crushing processing.
Working Principle:
The white sugar grinder machine uses a wind wheel high-speed rotating knife, the fixed knife for impact, shear grinding, crushing time cavity produced a strong air flow, the heat of the crushing chamber and the finished product together from the screen, the size of the particle size through the replacement of the screen.
This white sugar grinder machine is especially suitable for chemical industry and pharmaceutical industry, easy to heat the material grinding <50℃, discharge bag about 200 mesh, bag length about 5-10 meters, the effect is quite good.
Plate wing type air-cooled crusher is used for crushing materials in pharmaceutical, chemical, food and other industries, especially suitable for crushing heat-sensitive materials, low melting point and easy to melt materials, such as: chemical raw materials, Chinese and Western medicinal materials, food raw materials, resins, coatings, graphite, paraffin, soap and other tens of thousands of materials. Grinding fineness: 8-120 mesh (adjustable), when the output can reach 50-5000kg, the machine comes with water cooling layer, can be the grinding silo and grinding spindle for cooling. To avoid material deterioration or melting due to high temperature site. In addition, the machine is made of stainless steel, which meets the health standards of various industries.
The white sugar grinder machine is mainly composed of shell, door, impeller, spindle, screen, pulley and motor. When the grinder is rotating, the motor drives the spindle and cutter head to rotate at high speed. The cutter head and the module on the screen ring form a crushing and grinding pair. When the material enters the machine chamber from the hopper, the material closely fricts and strongly impacts the blade inside the cutter head in the rotating air flow, and grinds again in the gap between the blade and the module. While crushing the material, the cutter head draws a lot of air, which plays the role of cooling the machine, grinding the material and transferring the fine material. The fineness of the material crushing depends on the nature of the material and the size of the screen, as well as the amount of material and air passing through.
The bearing parts of the mill are equipped with a special maze seal, which can effectively prevent dust from entering the bearing chamber, thus extending the service life of the bearing. The door is equipped with silicone rubber sealing ring, no dust leakage and pollution of the operating environment.
Features：
The grinding room adopts the wind wheel type high-speed rotating knife, the air volume in the chamber is large, and the chamber is not easy to heat. It has the characteristics of smooth operation, convenient disassembly and cleaning, low noise, good crushing effect and so on.
advantages
1, Crushing ability is strong, low energy consumption, the product is relatively small fineness.
2, The crushing space is large, and the high wind pressure generated when the cutter head is running can not only improve the production capacity, reduce the phenomenon of over-crushing, but also effectively avoid the deposition and blockage of the screen during the crushing process of the material.
3. Due to the enhanced shearing, the crushing capacity of fibrous materials is higher than that of ordinary equipment.
4, The installation of the screen is convenient, the positioning is reliable, and the screen is inserted. The service life is much higher than the ring sieve form.
Technical Parameters
| Model | Capacity(kg/h) | Size of input granules | Size of Output granules | Power(kw) | Speed of principle axis(rpm) | Overall Dimension(L*W*H)(mm) | Weight(kg) |
| FL-150 | 20-80 | ≤6 | 50-150 | 3 | 4200 | 550*420*1088 | 185kg |
| FL-250 | 30-200 | ≤6 | 50-150 | 4 | 3400 | 770*750*1500 | 220kg |
| FL-350 | 50-300 | ≤6 | 50-150 | 7.5 | 2900 | 870*750*1708 | 300 |
FAQ
If you want to send an inquiry to me about our crusher, could you please tell me?
1) Q: Do you have the products in stock?
A: We'll have some of our typical equipment on hand. Other deliveries will take between 35 and 45 days.
2) Q: What’s the delivery time?
A: Some of our standard machines will be in stock. Other delivery times will be about 35-45 days.
3) Q: Can I mix different machine models in one container?
A: Yes, various models can coexist in the same container.
Hot Tags: white sugar grinder machine, China white sugar grinder machine manufacturers, suppliers, factory, Motherwort Powder Ultrafine Milling Machine, Ultra Fine Grinder, PE Plastic Cryogenic Freezing Pulverizer, Superfine Powder Grinding Machine, Cowhide Granule Freezing Pulverizer, Mustard Powder Ultrafine Mill
You Might Also Like
Send Inquiry