Sugar Coating Machine
Introduction:
The sugar coating machine is a mechanical device used to make products such as pills and candy. It can be used to wrap a drug or candy in an outer coating to improve taste, mask the bitter taste of the drug, or increase the appeal of the product. The icing machine completes the icing process through a series of steps involving coating, rotation, drying and cooling.
Working Principle:
The working principle of the sugar coating machine is based on the following key principles:
Coating principle: Spray liquid solution to the surface of the material through the nozzle, and use the adhesion and surface tension of the liquid solution to make it evenly distributed and form a film.
Rotation principle: By rotating the bottom plate and coating cover, the material can maintain a uniform distribution during the coating process. Rotation can also increase the contact area between the solution and the material, and improve the coating effect.
Drying principle: By evaporating the solvent coated on the surface of the material, the outer film quickly becomes strong using hot air or heating elements to provide heat and accelerate the evaporation process of the solvent.
Cooling principle: By reducing the temperature of the material, the outer film is more firm. Usually, cold air is sprayed to the surface of the material or the material is placed in a low temperature environment for cooling.
component：
Overlay system
Coating system is one of the most critical components of the sugar coating machine. It consists of components such as a coating cover, a nozzle and a bottom plate. First, the material that needs to be wrapped is placed on the bottom plate and is evenly distributed by rotating the bottom plate. The desired liquid solution, such as gelling agent or pigment solution, is then sprayed from above through the nozzle. Nozzles typically have multiple outlets to ensure uniform coverage of the entire material surface.
Rotating system
The rotation system is used to control the rotation speed of the base plate and the coating cover. : By rotating the base plate, the material can be evenly distributed during the coating process, thus ensuring the uniformity of the icing. At the same time, the coating also needs to be rotated to ensure that the liquid solution is evenly sprayed onto the surface of the material.
Drying system
The drying system is used to quickly dry the liquid solution applied to the surface of the material. The usual method is to provide heat by spraying hot air onto the surface of the material or by using heating elements. This quickly evaporates the solvent and forms a strong film on the outer layer.
Cooling system
The cooling system is used to reduce the temperature of the material and make the outer film stronger. The usual method is to cool the material by spraying cold air onto the surface of the material or by placing the material in a low temperature environment.
Work flow：
The following will introduce the work flow of the sugar coating machine in detail.
Preparatory work
Before starting the operation, the following materials and equipment need to be prepared:
Materials: pills, candy and other items that need to be wrapped.
Liquid solution: gelling agent, pigment solution and other liquids used in the manufacture of icing.
Bottom plate: A flat plate on which materials are placed.
Coating cover: covers the base plate to control material distribution and the coating process.
Coating process
Place the material on the bottom plate and distribute it evenly by rotating the bottom plate. 2 Start the rotating system and start the nozzle to spray the liquid solution on the surface of the material. Nozzles typically have multiple outlets to ensure uniform coverage of the entire material surface.
The liquid solution quickly diffuses and forms a film when sprayed onto the surface of the material. This step usually needs to be continued several times to ensure the thickness of the icing is the required.
Drying process
When the icing is formed, the drying system is activated to quickly evaporate the solvent coated on the surface of the material. Rapid drying can be achieved by spraying hot air onto the surface of the material or by using heating elements to provide heat. The rapidly evaporating solvent makes the outer film quickly strong, thus ensuring the integrity and stability of the icing
Cooling process
When the icing is dry, the cooling system is started to reduce the temperature of the material and make the outer film stronger. The cooling system is usually cooled by spraying cold air onto the surface of the material or placing the material in a low temperature environment.
Finish and clean
When the icing is finished, all systems are stopped and the finished product is removed to clean the icing machine for the next use.
Company introduction：
Our company professionally manufactures mechanism products applied in pharmaceutics, chemical industry, chemical fiber, foodstuff, and metallurgical areas, with high technology and advanced equipment. We have a modern enterprise system and combine it with enterprise culture construction, executing scientific management. Our company is committing to producing mechanism products with drying, disintegrating, sifting, mixing, granulating, and dedusting functions.
Our company has an influential technology center and strictly abides by GMP and industrial standards in production. Meanwhile, we are engaged in designing, processing, and installing various fasteners.
We adhere to the tenet of "Quality First, Consumer Uppermost", and warmly welcome customers from home and abroad to establish business relationships with us!
Technical Parameters-MF-Ultrafine ball mill
|
Model |
Motor Power(KW) |
Graded power（KW） |
Equipment weight（T） | Equipment size(M) | Product fineness(d97=um) |
|
MF0.83×0.5 |
22 |
2.2 |
7.5 |
4.85×2.7×2.2 |
2-100 |
| MF2.2×0.5 |
75 |
6 |
18.8 |
9.2×2.98×2.42 | 2-100 |
| MF3×0.5 | 200 |
15 |
34.2 |
10.5×3.38×3.2 | 2-100 |
| MF3.5×0.5 |
250 |
30 |
47 |
10.5×3.63×3.72 | 2-100 |
| MF4×0.5 |
355 |
44 |
67.5 |
11.4×4.6×4.21 | 2-100 |
| MF4.5×0.5 |
500 |
74 |
83.8 |
11.4×5.1×4.72 | 2-100 |
FAQ
1. Q: Are you a manufacturer, trading company, or a third party?
A: We are a manufacturer, we have our own factory
2. Q: Where is your factory located?
A: Our factory address is: No.9 Yungu Road, Zhutang Town, Jiangyin City, Jiangsu Province, China.
3. Q: How can I get to your factory?
A: Our factory is near Shanghai Airport, Wuxi Shuofang Airport, and Nanjing Airport, we can pick you up at the airport.
4. Q: May I know which payment will be accepted by your company?
A: So far 100% by T/T before shipment, and 30% deposit paid by T/T, balance paid by T/T or L/C are available.
Hot Tags: sugar coating machine, China sugar coating machine manufacturers, suppliers, factory
Previous
Tablet Coating MachineNext
No InformationYou Might Also Like
Send Inquiry